[PATCH RESEND 02/10] via-cuda: Remove redundant temporary variable

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Finn Thain <fthain@telegraphics.com.au>
Newsgroups	linux.kernel
Subject	[PATCH RESEND 02/10] via-cuda: Remove redundant temporary variable
Date	Sun, 01 Jan 2017 02:00:01 +0100
Message-ID	<sUCFb-1FL-15@gated-at.bofh.it> (permalink)
References	<sUCFb-1FL-3@gated-at.bofh.it>
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	38
Organization	linux.* mail to news gateway
X-Original-Cc	linux-m68k@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
X-Original-Date	Sat, 31 Dec 2016 19:56:26 -0500 (EST)
X-Original-Message-ID	<5a4f903487ce29a690d5c26573d63d1490d2d29e.1483055859.git.fthain@telegraphics.com.au>
X-Original-References	<cover.1483055859.git.fthain@telegraphics.com.au>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1548853

Show key headers only | View raw

There is no possibility that current_req can change during execution of
cuda_start(). This can be confirmed by inspection: cuda_lock is always
held whenever cuda_start() is called or current_req is modified.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
 drivers/macintosh/via-cuda.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 0617512..dd51df5 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -414,19 +414,15 @@ cuda_write(struct adb_request *req)
 static void
 cuda_start(void)
 {
-    struct adb_request *req;
-
     /* assert cuda_state == idle */
-    /* get the packet to send */
-    req = current_req;
-    if (req == 0)
+    if (current_req == NULL)
 	return;
     if ((in_8(&via[B]) & TREQ) == 0)
 	return;			/* a byte is coming in from the CUDA */
 
     /* set the shift register to shift out and send a byte */
     out_8(&via[ACR], in_8(&via[ACR]) | SR_OUT);
-    out_8(&via[SR], req->data[0]);
+    out_8(&via[SR], current_req->data[0]);
     out_8(&via[B], in_8(&via[B]) & ~TIP);
     cuda_state = sent_first_byte;
 }
-- 
2.10.2

Thread

[PATCH RESEND 00/10] Replace via-maciisi with via-cuda driver Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 04/10] via-cuda: Prevent read buffer overflow Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 10/10] m68k/mac: Replace via-maciisi driver with  via-cuda driver Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
    Re: [PATCH RESEND 10/10] m68k/mac: Replace via-maciisi driver with  via-cuda driver Geert Uytterhoeven <geert@linux-m68k.org> - 2017-01-02 11:30 +0100
      Re: [PATCH RESEND 10/10] m68k/mac: Replace via-maciisi driver with  via-cuda driver Finn Thain <fthain@telegraphics.com.au> - 2017-01-03 01:40 +0100
  [PATCH RESEND 05/10] via-cuda: Fix re-initialization of reply_ptr and  reading_reply Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 08/10] via-cuda: Initialize data_index early and  increment consistently Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 02/10] via-cuda: Remove redundant temporary variable Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 01/10] via-cuda: Cleanup printk calls Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 09/10] via-cuda: Add support for Egret system  controller Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 03/10] via-cuda: Add TREQ, TIP and TACK signal helpers Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100
  [PATCH RESEND 07/10] via-cuda: Use spinlock_irq_save/restore instead  of enable/disable_irq Finn Thain <fthain@telegraphics.com.au> - 2017-01-01 02:00 +0100

csiph-web