Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1548104
| From | Stephen Boyd <stephen.boyd@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v6 06/25] usb: chipidea: Add platform flag for wrapper phy management |
| Date | 2016-12-29 00:10 +0100 |
| Message-ID | <sTvw6-6Mq-21@gated-at.bofh.it> (permalink) |
| References | <sTvmp-6sL-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The ULPI phy on qcom platforms needs to be initialized and
powered on after a USB reset and before we toggle the run/stop
bit. Otherwise, the phy locks up and doesn't work properly.
Therefore, add a flag to skip any phy power management in the
core layer, leaving it up to the glue driver to manage.
Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
drivers/usb/chipidea/core.c | 6 ++++++
include/linux/usb/chipidea.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 6e0d614a8075..3d15aee84a6a 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -361,6 +361,9 @@ static int _ci_usb_phy_init(struct ci_hdrc *ci)
*/
static void ci_usb_phy_exit(struct ci_hdrc *ci)
{
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return;
+
if (ci->phy) {
phy_power_off(ci->phy);
phy_exit(ci->phy);
@@ -379,6 +382,9 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
{
int ret;
+ if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL)
+ return 0;
+
switch (ci->platdata->phy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
case USBPHY_INTERFACE_MODE_UTMIW:
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index f9be467d6695..d07b162073f7 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -57,6 +57,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
#define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
+#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
2.10.0.297.gf6727b0
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v6 00/25] Support qcom's HSIC USB and rewrite USB2 HS support Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 01/25] of: device: Support loading a module with OF based modalias Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 03/25] usb: ulpi: Support device discovery via DT Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 07/25] usb: chipidea: Notify events when switching host mode Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 15/25] usb: chipidea: msm: Add proper clk and reset support Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 08/25] usb: chipidea: Remove locking in ci_udc_start() Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 14/25] usb: chipidea: msm: Use hw_write_id_reg() instead of writel Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 04/25] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 06/25] usb: chipidea: Add platform flag for wrapper phy management Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 13/25] usb: chipidea: msm: Rely on core to override AHBBURST Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 10/25] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 05/25] usb: chipidea: Handle extcon events properly Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 11/25] usb: chipidea: vbus event may exist before starting gadget Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
Re: [PATCH v6 11/25] usb: chipidea: vbus event may exist before starting gadget Peter Chen <hzpeterchen@gmail.com> - 2017-01-03 09:10 +0100
[PATCH v6 02/25] of: device: Export of_device_{get_modalias,uvent_modalias} to modules Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
[PATCH v6 16/25] usb: chipidea: msm: Mux over secondary phy at the right time Stephen Boyd <stephen.boyd@linaro.org> - 2016-12-29 00:10 +0100
csiph-web