Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1546304

Re: [PATCH] stmmac: CSR clock configuration fix

Show all headers | View raw

Às 12:23 PM de 12/22/2016, Joao Pinto escreveu:
> 
> Hi David,
> 
> Às 10:15 AM de 12/22/2016, Joao Pinto escreveu:
>> Às 6:21 PM de 12/21/2016, David Miller escreveu:
>>> From: Joao Pinto <Joao.Pinto@synopsys.com>
>>> Date: Tue, 20 Dec 2016 11:21:47 +0000
>>>
>>>> When testing stmmac with my QoS reference design I checked a problem in the
>>>> CSR clock configuration that was impossibilitating the phy discovery, since
>>>> every read operation returned 0x0000ffff. This patch fixes the issue.
>>>>
>>>> Signed-off-by: Joao Pinto <jpinto@synopsys.com>
>>>
>>> This isn't enough.
>>>
>>> It looks like various parts of this driver set the mask field
>>> differently.
>>>
>>> dwmac1000_core.c and dwmac100_core.c set the mask to be the low bits.
>>>
>>> But dwmac4_core.c uses GENMASK(11, 8) which means the mask is a value
>>> which is shifted up already.
>>>
>>> So your patch will break chips driven by dwmac4_core.c.
>>
>> I am using a GMAC4 reference design to test the patches. The clock configuration
>> as is, does not work, resulting in the phy discovery failure. By applying this
>> patch I am able to set the clock value properly.
>>
>> I am going to check in the Databook of GMAC4 and older versions in order to
>> justify better.
> 
> So from the 4.20 Databook:
> 
> Bits
> 11:8 CR parameter
> 0000: CSR clock = 60-100 MHz; MDC clock = CSR
> 0001: CSR clock = 100-150 MHz; MDC clock = CSR
> 0010: CSR clock = 20-35 MHz; MDC clock = CSR
> 0011: CSR clock = 35-60 MHz; MDC clock = CSR
> 0100: CSR clock = 150-250 MHz; MDC clock = CSR
> 0101: CSR clock = 250-300 MHz; MDC clock = CSR
> 0110, 0111: Reserved
> 
> For example, if you want configure the CSR clock to 250-300MHZ (my case), you
> will set the parameter CR to 0x5. The current mechanism simply messes the value.
> With this fix, the 0x5 is shifted to 11:8 like the databook specifies and
> applies a GENMASK(11:8) on top, causing the reset of every bit outside the 11:8
> which is an assurance.
> 
> For older cores like 4.10 and 4.00 the logic is the same. The information was
> confirmed by R&D.
> 
> Thanks.

Bu checking DWMAC100 and DWMAC1000 I understand your concern now. I am going to
change their masks also in order to put it right. V2 comming soon.

Thanks.

> 
>>
>>>
>>> In order for your change to be correct you must consolidate all of
>>> these various pieces to use the same convention.
>>>
>>
>> Thanks.
>>
> 

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] stmmac: CSR clock configuration fix Joao Pinto <Joao.Pinto@synopsys.com> - 2016-12-20 12:30 +0100
  Re: [PATCH] stmmac: CSR clock configuration fix David Miller <davem@davemloft.net> - 2016-12-21 19:30 +0100
    Re: [PATCH] stmmac: CSR clock configuration fix Joao Pinto <Joao.Pinto@synopsys.com> - 2016-12-22 11:20 +0100
      Re: [PATCH] stmmac: CSR clock configuration fix Joao Pinto <Joao.Pinto@synopsys.com> - 2016-12-22 13:40 +0100
      Re: [PATCH] stmmac: CSR clock configuration fix Joao Pinto <Joao.Pinto@synopsys.com> - 2016-12-22 13:40 +0100

csiph-web