Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1537235
| From | Krzysztof Kozlowski <krzk@kernel.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 5/5] arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2 |
| Date | 2016-12-06 20:30 +0100 |
| Message-ID | <sLtB8-6bM-37@gated-at.bofh.it> (permalink) |
| References | <sJQit-uF-3@gated-at.bofh.it> <sJQit-uF-23@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Fri, Dec 02, 2016 at 04:18:07PM +0900, Chanwoo Choi wrote:
> This patch adds the bus Device-tree nodes for INT (Internal) block
> to enable the bus frequency scaling.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 72 +++++++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index c08589970134..7b37aae336b1 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -170,6 +170,58 @@
> };
> };
>
> +&bus_g2d_400 {
> + devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
> + vdd-supply = <&buck4_reg>;
> + exynos,saturation-ratio = <10>;
> + status = "okay";
> +};
> +
> +&bus_mscl {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_jpeg {
Except the first entry (which is a parent), are there any objections to
order these nodes alphabetically? This also applies to the previously
patch.
Beside that nit, looks good. I will have to wait anyway to next merge
window, so for the reference:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_mfc {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_g2d_266 {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_gscl {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_hevc {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_bus0 {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_bus1 {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> +&bus_bus2 {
> + devfreq = <&bus_g2d_400>;
> + status = "okay";
> +};
> +
> &cmu_aud {
> assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
> assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
> @@ -794,6 +846,26 @@
> bus-width = <4>;
> };
>
> +&ppmu_d0_general {
> + status = "okay";
> +
> + events {
> + ppmu_event0_d0_general: ppmu-event0-d0-general {
> + event-name = "ppmu-event0-d0-general";
> + };
> + };
> +};
> +
> +&ppmu_d1_general {
> + status = "okay";
> +
> + events {
> + ppmu_event0_d1_general: ppmu-event0-d1-general {
> + event-name = "ppmu-event0-d1-general";
> + };
> + };
> +};
> +
> &pinctrl_alive {
> pinctrl-names = "default";
> pinctrl-0 = <&initial_alive>;
> --
> 1.9.1
>
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH 5/5] arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2 Chanwoo Choi <cw00.choi@samsung.com> - 2016-12-02 08:20 +0100 Re: [PATCH 5/5] arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2 Krzysztof Kozlowski <krzk@kernel.org> - 2016-12-06 20:30 +0100
csiph-web