[RFC v2 1/4] ACPI: SPCR: check bit width for the 16550 UART

From	Aleksey Makarov <aleksey.makarov@linaro.org>
Newsgroups	linux.kernel
Subject	[RFC v2 1/4] ACPI: SPCR: check bit width for the 16550 UART
Date	2016-12-06 19:00 +0100
Message-ID	<sLsc1-59b-15@gated-at.bofh.it> (permalink)
References	<sLsc1-59b-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Check the 'Register Bit Width' field of the ACPI Generic Address
Structure that specifies the address of the UART registers to
decide if the driver should use "mmio32" access instead of "mmio".

If the driver is other than 16550 the access width is defined
by the Interface Type field of the SPCR table.

Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Reported-by: Heyi Guo <heyi.guo@linaro.org>
---
 drivers/acpi/spcr.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index e8d7bc7..6c6710b 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -70,6 +70,10 @@ int __init parse_spcr(bool earlycon)
 		break;
 	case ACPI_DBG2_16550_COMPATIBLE:
 	case ACPI_DBG2_16550_SUBSET:
+		if (table->serial_port.space_id ==
+			ACPI_ADR_SPACE_SYSTEM_MEMORY &&
+		    table->serial_port.bit_width == 32)
+			iotype = "mmio32";
 		uart = "uart";
 		break;
 	default:
-- 
2.10.2

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[RFC v2 1/4] ACPI: SPCR: check bit width for the 16550 UART Aleksey Makarov <aleksey.makarov@linaro.org> - 2016-12-06 19:00 +0100

csiph-web