Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1534711

[PATCH 0/5] arm64: dts: Enable bus frequency scaling on Exynos5433-based TM2 board

Show key headers only | View raw

This patches add the AMBA bus Device-tree node unsing VDD_INT
to enable the bus frequency scaling on Exynos5433-based TM2 board.

There are two kind of bus device with devfreq framework.
- Parent bus device  : Change the frequency/voltage according to bus's utilization.
- Passive bus device : Change only frequency according to the new level
                       of parent bus device.

The VDD_INT regulator provides the power source to INT (Internal) block as
following. The sub-blocks in the INT block share the one power source.
       VDD_INT |--- G2D (parent device)
               |--- MSCL
               |--- GSCL
               |--- JPEG
               |--- MFC
               |--- HEVC
               |--- BUS0
               |--- BUS1
               |--- BUS2
               |--- PERIS (Fixed clock rate)
               |--- PERIC (Fixed clock rate)
               |--- FSYS  (Fixed clock rate)

Each sub-block has the bus clock as following:
 - CLK_ACLK_G2D_{400|266} : Bus clock for G2D
 - CLK_ACLK_MSCL_400      : Bus clock for MSCL (Mobile Scaler)
 - CLK_ACLK_GSCL_333      : Bus clock for GSCL (General Scaler)
 - CLK_SCLK_JPEG_MSCL     : Bus clock for JPEG
 - CLK_ACLK_MFC_400       : Bus clock for MFC (Multi Format Codec)
 - CLK_ACLK_HEVC_400      : Bus clock for HEVC (High Effective Video Codec)
 - CLK_ACLK_BUS0_400      : NoC(Network On Chip)'s bus clock for PERIC/PERIS/FSYS/MSCL
 - CLK_ACLK_BUS1_400      : NoC's bus clock for MFC/HEVC/G3D
 - CLK_ACLK_BUS2_400      : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP

Chanwoo Choi (5):
  clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical
  PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
  arm64: dts: exynos5433: Add PPMU dt node
  arm64: dts: exynos5433: Add bus dt node using VDD_INT for Exynos5433
  arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2

 .../devicetree/bindings/devfreq/exynos-bus.txt     |  14 ++
 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi     | 208 +++++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      |  72 +++++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         |  25 +++
 drivers/clk/samsung/clk-exynos5433.c               |   8 +-
 5 files changed, 323 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi

-- 
1.9.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 0/5] arm64: dts: Enable bus frequency scaling on  Exynos5433-based TM2 board Chanwoo Choi <cw00.choi@samsung.com> - 2016-12-02 08:20 +0100

csiph-web