Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1530352

Re: Tearing down DMA transfer setup after DMA client has finished

From Måns Rullgård <mans@mansr.com>
Newsgroups linux.kernel
Subject Re: Tearing down DMA transfer setup after DMA client has finished
Date 2016-11-25 16:30 +0100
Message-ID <sHqBQ-2hw-21@gated-at.bofh.it> (permalink)
References (7 earlier) <sHpmq-1yD-25@gated-at.bofh.it> <sHpFL-1In-17@gated-at.bofh.it> <sHqiu-2aY-43@gated-at.bofh.it> <sHqsb-2er-51@gated-at.bofh.it> <sHqBP-2hw-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

Mason <slash.tmp@free.fr> writes:

> On 25/11/2016 16:12, Måns Rullgård wrote:
>
>> Mason writes:
>> 
>>> I've had several talks with the HW dev, and I don't think they
>>> anticipated the need to mux the 3 channels. In their minds,
>>> customers would choose at most 3 devices to support, and
>>> assign one channel to each device statically.
>>>
>>> In fact, in tango4, supported devices are:
>>> A) NAND Flash controllers 0 and 1
>>> NB: the upstream driver only uses controller 0
>>> B) IDE or SATA controllers 0 and 1
>>> C) a few crypto HW blocks which do not work as expected (unused)
>>>
>>> Customers typically use 1 channel for NAND, maybe 1 for SATA,
>>> and 1 channel remains unused.
>> 
>> The hardware has two sata controllers, and I have a board that uses both.
>
> I don't have the tango3 client devices in mind, but
> 1 NAND + 2 SATA works out alright for 3 channels, right?

There are only two usable channels.

Besides, your 3.4 kernel allocates the channels dynamically, sort of,
but since it has a completely custom api, this particular timing issue
doesn't arise there.

-- 
Måns Rullgård

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-23 11:30 +0100
  Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-23 13:20 +0100
    Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-23 13:50 +0100
      Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-23 18:30 +0100
        Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-24 12:00 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-24 15:20 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-24 16:30 +0100
              Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-24 17:40 +0100
  Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-11-25 05:50 +0100
    Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 13:00 +0100
      Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 15:10 +0100
        Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:20 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 15:30 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:50 +0100
    Re: Tearing down DMA transfer setup after DMA client has finished Russell King - ARM Linux <linux@armlinux.org.uk> - 2016-11-25 13:50 +0100
      Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 14:10 +0100
        Re: Tearing down DMA transfer setup after DMA client has finished Russell King - ARM Linux <linux@armlinux.org.uk> - 2016-11-25 14:40 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Russell King - ARM Linux <linux@armlinux.org.uk> - 2016-11-25 15:00 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:10 +0100
              Re: Tearing down DMA transfer setup after DMA client has finished Russell King - ARM Linux <linux@armlinux.org.uk> - 2016-11-25 15:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Russell King - ARM Linux <linux@armlinux.org.uk> - 2016-11-25 16:00 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 16:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 16:10 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 16:20 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 16:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 16:30 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:00 +0100
    Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 13:50 +0100
      Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 14:20 +0100
        Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 15:30 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-11-25 15:40 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-25 16:50 +0100
      Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-11-29 19:30 +0100
        Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-06 06:10 +0100
          Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-06 13:50 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-06 14:20 +0100
              Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-06 16:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-06 16:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-07 00:00 +0100
              Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-07 17:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-07 17:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 11:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-08 12:00 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Geert Uytterhoeven <geert@linux-m68k.org> - 2016-12-08 12:20 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 12:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Geert Uytterhoeven <geert@linux-m68k.org> - 2016-12-08 13:10 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-08 13:20 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 13:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 17:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 17:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-09 08:10 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Sebastian Frias <sf84@laposte.net> - 2016-12-09 11:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-09 12:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished 1Måns Rullgård <mans@mansr.com> - 2016-12-09 12:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-09 18:20 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-09 18:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-09 19:00 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-09 18:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-09 19:00 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-09 19:20 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-09 19:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 12:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Geert Uytterhoeven <geert@linux-m68k.org> - 2016-12-08 13:10 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 13:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Geert Uytterhoeven <geert@linux-m68k.org> - 2016-12-08 13:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 13:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-08 14:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 14:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-08 13:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 16:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 17:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 16:40 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Mason <slash.tmp@free.fr> - 2016-12-08 16:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 17:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 17:50 +0100
            Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-07 17:40 +0100
              Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-07 17:50 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Vinod Koul <vinod.koul@intel.com> - 2016-12-08 11:30 +0100
                Re: Tearing down DMA transfer setup after DMA client has finished Måns Rullgård <mans@mansr.com> - 2016-12-08 12:50 +0100

csiph-web