Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1530784

Re: [PATCH RFC] HID: cp2112: add IRQ chip handling

From Antonio Borneo <borneo.antonio@gmail.com>
Newsgroups linux.kernel
Subject Re: [PATCH RFC] HID: cp2112: add IRQ chip handling
Date 2016-11-26 23:00 +0100
Message-ID <sHTaN-3Ec-5@gated-at.bofh.it> (permalink)
References <sFUE1-pB-1@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Mon, Nov 21, 2016 at 12:07 PM, Benjamin Tissoires
<benjamin.tissoires@redhat.com> wrote:
> The GPIO part doesn't provide interrupts when GPIO are toggled.
> So use a polling mechanism if someone requests a GPIO as an IRQ.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> ---
>
> I am currently running this patch in my local tree.
> It allows to attach a SMBus device completely on the CP2112, with a simple
> definition at the end of probe:
>
>         {
>                 struct i2c_client *client;
>                 struct i2c_hid_platform_data pdata = {
>                         .hid_descriptor_address = 0x20,
>                 };
>                 struct i2c_board_info synaptics_info = {
>                         I2C_BOARD_INFO("hid", 0x2c),
>                         .platform_data = &pdata,
>                 };
>                 int irq = cp2112_allocate_irq(dev, 2);
>
>                 if (irq <= 0) {
>                         dev_err(dev->gc.parent, "Failed to translate GPIO to IRQ\n");
>                         goto err_sysfs_remove;
>                 }
>
>                 synaptics_info.irq = irq;
>                 irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
>
>                 hid_device_io_start(hdev);
>
>                 /* give time for the device to initialize */
>                 msleep(500);
>
>                 client = i2c_new_device(&dev->adap, &synaptics_info);
>                 if (!client)
>                         hid_err(hdev, "failed allocating Synaptics device\n");
>
>         }
>
> I wonder if we want to consider this upstream, given that the driver is only
> used for development.

Ciao Benjamin,

for me it makes sense to push it upstream.
I also coded something similar 2+ years ago, but then my cp2112 got
broken before I could clean-up and submit the patches.
As far as I remember, Ellen was using cp2112 in a system in production.
For sure this driver is not widely used, but definitively it's not for
development use only.

Best Regards
Antonio

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

Re: [PATCH RFC] HID: cp2112: add IRQ chip handling Antonio Borneo <borneo.antonio@gmail.com> - 2016-11-26 23:00 +0100
  Re: [PATCH RFC] HID: cp2112: add IRQ chip handling Jiri Kosina <jikos@kernel.org> - 2016-11-28 14:50 +0100

csiph-web