Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1528131
| From | Sekhar Nori <nsekhar@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios |
| Date | 2016-11-23 06:20 +0100 |
| Message-ID | <sGy8p-t6-9@gated-at.bofh.it> (permalink) |
| References | <sG06K-3IM-1@gated-at.bofh.it> <sG06K-3IM-35@gated-at.bofh.it> <sGgEy-5YE-25@gated-at.bofh.it> <sGluy-yw-37@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Tuesday 22 November 2016 09:11 PM, Axel Haslam wrote: > Hi Sekhar > > On Tue, Nov 22, 2016 at 11:37 AM, Sekhar Nori <nsekhar@ti.com> wrote: >> On Monday 21 November 2016 10:23 PM, Axel Haslam wrote: >>> The hawk board VBUS is fixed to a 5v source, and the over >>> current pin is actually not connected to the SoC. >>> >>> Do not reseve these gpios for OHCI as they are not related >>> to usb. >>> >>> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> >> >> As discussed over the MMC/SD patches, this patch should be based off the >> hawkboard schematic, not the LCDK schematic. >> > > I looked at the hawkboard schematics and they are the same > as the lcdk as far as usb i concerned: > > The ohci vbus is fixed to 5v, and the over current pins of the > TPS are not connected. so this patch should be ok for > both the hawk and the lcdk. Alright! Thanks for checking. Regards, Sekhar
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[RESEND PATCH 0/3] ARM: davinci: OHCI: Use a regulator instead of callbacks Axel Haslam <ahaslam@baylibre.com> - 2016-11-21 18:00 +0100
[RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam <ahaslam@baylibre.com> - 2016-11-21 18:00 +0100
Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Sekhar Nori <nsekhar@ti.com> - 2016-11-22 11:40 +0100
Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam <ahaslam@baylibre.com> - 2016-11-22 16:50 +0100
Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios Sekhar Nori <nsekhar@ti.com> - 2016-11-23 06:20 +0100
[RESEND PATCH 3/3] ARM: davinci: remove ohci platform usage Axel Haslam <ahaslam@baylibre.com> - 2016-11-21 18:00 +0100
Re: [RESEND PATCH 3/3] ARM: davinci: remove ohci platform usage Sekhar Nori <nsekhar@ti.com> - 2016-11-22 11:50 +0100
[RESEND PATCH 1/3] ARM: davinci: da830: Handle vbus with a regulator Axel Haslam <ahaslam@baylibre.com> - 2016-11-21 18:00 +0100
Re: [RESEND PATCH 1/3] ARM: davinci: da830: Handle vbus with a regulator Sekhar Nori <nsekhar@ti.com> - 2016-11-22 11:40 +0100
csiph-web