Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1528455

Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero

From Hans de Goede <hdegoede@redhat.com>
Newsgroups linux.kernel
Subject Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero
Date 2016-11-23 15:40 +0100
Message-ID <sGGSm-65N-23@gated-at.bofh.it> (permalink)
References <sGBfY-2uO-31@gated-at.bofh.it> <sGBfY-2uO-33@gated-at.bofh.it> <sGBfY-2uO-29@gated-at.bofh.it> <sGGIF-62A-23@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi,

On 23-11-16 15:25, Chen-Yu Tsai wrote:
> On Wed, Nov 23, 2016 at 3:59 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
>> Hi,
>>
>> On Tue, Nov 22, 2016 at 12:24:21AM +0800, Icenowy Zheng wrote:
>>> There's a Allwinner's XR819 SDIO Wi-Fi module soldered on the board of
>>> Orange Pi Zero, which used a dedicated regulator to power.
>>>
>>> Add the device tree node of the regulator, the enable gpio (with
>>> mmc-pwrseq) and the sdio controller.
>>>
>>> There's a out-of-tree driver tested to work with this device tree.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>>> ---
>>> New patch in the patchset, since a out-of-tree working xradio driver is done.
>>>
>>> If there is any problem in this patch, it can be omitted.
>>
>> No particular problem with this one, however it can and should be
>> merged with the previous one.
>>
>> Minor comments below though.
>>
>>>
>>>  arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts | 42 ++++++++++++++++++++++++
>>>  1 file changed, 42 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>> index b428e47..39cac26 100644
>>> --- a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>> +++ b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>> @@ -79,6 +79,24 @@
>>>                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
>>>               };
>>>       };
>>> +
>>> +     reg_vcc_wifi: reg_vcc_wifi {
>>> +             compatible = "regulator-fixed";
>>> +             pinctrl-names = "default";
>>> +             pinctrl-0 = <&vcc_wifi_pin_opi0>;
>>> +             regulator-min-microvolt = <3300000>;
>>> +             regulator-max-microvolt = <3300000>;
>>> +             regulator-name = "vcc-wifi";
>>> +             enable-active-high;
>>> +             gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
>>> +     };
>>> +
>>> +     wifi_pwrseq: wifi_pwrseq {
>>> +             compatible = "mmc-pwrseq-simple";
>>> +             pinctrl-names = "default";
>>> +             pinctrl-0 = <&wifi_pwrseq_pin_opi0>;
>>> +             reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
>>> +     };
>>>  };
>>>
>>>  &ehci1 {
>>> @@ -95,6 +113,20 @@
>>>       status = "okay";
>>>  };
>>>
>>> +&mmc1 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&mmc1_pins_a>;
>>> +     vmmc-supply = <&reg_vcc_wifi>;
>>> +     mmc-pwrseq = <&wifi_pwrseq>;
>>> +     bus-width = <4>;
>>> +     non-removable;
>>> +     status = "okay";
>>> +};
>>> +
>>> +&mmc1_pins_a {
>>> +     allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>>
>> This should be bias-pull-up.
>
> IIRC I already added this for _all_ existing mmc pinmux settings?
>
>>
>>> +};
>>> +
>>>  &ohci1 {
>>>       status = "okay";
>>>  };
>>> @@ -104,6 +136,11 @@
>>>               pins = "PA17";
>>>               function = "gpio_out";
>>>       };
>>> +
>>> +     vcc_wifi_pin_opi0: vcc_wifi_pin@0 {
>>> +             allwinner,pins = "PA20";
>>
>> This should be pins
>>
>>> +             allwinner,function = "gpio_out";
>>
>> This should be function
>>
>>> +     };
>>>  };
>>>
>>>  &r_pio {
>>> @@ -111,6 +148,11 @@
>>>               pins = "PL10";
>>>               function = "gpio_out";
>>>       };
>>> +
>>> +     wifi_pwrseq_pin_opi0: wifi_pwrseq_pin@0 {
>>> +             allwinner,pins = "PL7";
>>> +             allwinner,function = "gpio_out";
>>
>> And same thing here.
>
> Might we do away with the pinmux for gpio pins tradition?
> Recent patches I've sent all omit them.

I'm in favor of doing away with them, except there were
we need to configure bias / strength.

Regards,

Hans

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-11-23 09:40 +0100
  Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero Chen-Yu Tsai <wens@csie.org> - 2016-11-23 15:30 +0100
    Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero Hans de Goede <hdegoede@redhat.com> - 2016-11-23 15:40 +0100
    Re: [PATCH 3/3] ARM: dts: sunxi: enable SDIO Wi-Fi on Orange Pi Zero Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-11-24 22:40 +0100

csiph-web