Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1527118

[PATCH 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for Intel byt sdio controller sub-vended by NI

Show all headers | View raw

On NI 9037 boards the max SDIO frequency is limited by trace lengths
and other layout choices. The max SDIO frequency is stored in an ACPI
table.

The driver reads the ACPI entry MXFQ during sdio_probe_slot and sets the
f_max field of the host.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Reviewed-by: Jaeden Amero <jaeden.amero@ni.com>
Reviewed-by: Josh Cartwright <joshc@ni.com>
Signed-off-by: Zach Brown <zach.brown@ni.com>
---
 drivers/mmc/host/sdhci-pci-core.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 9741505..a855c97 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -27,6 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/sdhci-pci-data.h>
+#include <linux/acpi.h>
 
 #include "sdhci.h"
 #include "sdhci-pci.h"
@@ -377,6 +378,20 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 
 static int ni_byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
 {
+#ifdef CONFIG_ACPI
+	acpi_status status;
+	unsigned long long max_freq;
+
+	status = acpi_evaluate_integer(ACPI_HANDLE(&slot->chip->pdev->dev),
+				       "MXFQ", NULL, &max_freq);
+	if (ACPI_FAILURE(status)) {
+		dev_info(&slot->chip->pdev->dev,
+			"MXFQ not found in acpi table\n");
+		return -EINVAL;
+	}
+
+	slot->host->mmc->f_max = max_freq * 1000000;
+#endif
 	slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
 				 MMC_CAP_WAIT_WHILE_BUSY;
 	return 0;
-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for Intel byt sdio controller sub-vended by NI Zach Brown <zach.brown@ni.com> - 2016-11-22 00:10 +0100
  Re: [PATCH 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for  Intel byt sdio controller sub-vended by NI Adrian Hunter <adrian.hunter@intel.com> - 2016-11-22 08:00 +0100
  Re: [PATCH 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for  Intel byt sdio controller sub-vended by NI Ulf Hansson <ulf.hansson@linaro.org> - 2016-11-22 09:30 +0100

csiph-web