Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1526759

Re: Synopsys Ethernet QoS Driver

From Joao Pinto <Joao.Pinto@synopsys.com>
Newsgroups linux.kernel
Subject Re: Synopsys Ethernet QoS Driver
Date 2016-11-21 16:10 +0100
Message-ID <sFYoh-2MJ-5@gated-at.bofh.it> (permalink)
References (3 earlier) <sFPkZ-5k4-5@gated-at.bofh.it> <sFW38-1bK-9@gated-at.bofh.it> <sFWmz-1in-27@gated-at.bofh.it> <sFX8R-1Nh-5@gated-at.bofh.it> <sFXVf-2nj-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On 21-11-2016 14:36, Giuseppe CAVALLARO wrote:
> Hello Joao
> 
> On 11/21/2016 2:48 PM, Joao Pinto wrote:
>> Synopsys QoS IP is a separated hardware component, so it should be reusable by
>> all implementations using it and so have its own "core driver" and platform +
>> pci glue drivers. This is necessary for example in hardware validation, where
>> you prototype an IP and instantiate its drivers and test it.
>>
>> Was there a strong reason to integrate QoS features directly in stmmac and not
>> in synopsys/dwc_eth_qos.*?
> 
> We decided to enhance the stmmac on supporting the QoS for several
> reasons; for example the common APIs that the driver already exposed and
> actually suitable for other SYNP chips. Then, PTP, EEE,
> S/RGMII, MMC could be shared among different chips with a minimal
> effort.  This meant a lot of code already ready.
> 
> For sure, the net-core, Ethtool, mdio parts were reused. Same for the
> glue logic files.
> For the latter, this helped to easily bring-up new platforms also
> because the stmmac uses the HW cap register to auto-configure many
> parts of the MAC core, DMA and modules. This helped many users, AFAIK.
> 
> For validation purpose, this is my experience, the stmmac helped
> a lot because people used the same code to validate different HW
> and it was easy to switch to a platform to another one in order to
> verify / check if the support was ok or if a regression was introduced.
> This is important for complex supports like PTP or EEE.
> 
> Hoping this can help.
> 
> Do not hesitate to contact me for further details

Thanks for the highly detailed info.
My target application is to prototype the Ethernet QoS IP in a FPGA, with a PHY
attached and make hardware validation.

In your opinion a refactored stmmac with the missing QoS features would be
suitable for it?

Thanks.

> 
> peppe

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-18 15:30 +0100
  Re: Synopsys Ethernet QoS Driver Rabin Vincent <rabin@rab.in> - 2016-11-19 15:00 +0100
    Re: Synopsys Ethernet QoS Driver Rayagond Kokatanur <rayagond@vayavyalabs.com> - 2016-11-21 06:30 +0100
      Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 13:40 +0100
        Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-21 14:00 +0100
          Re: Synopsys Ethernet QoS Driver Lars Persson <lars.persson@axis.com> - 2016-11-21 14:30 +0100
            Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-21 15:30 +0100
              Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 16:10 +0100
                Re: Synopsys Ethernet QoS Driver Lars Persson <lars.persson@axis.com> - 2016-11-21 16:50 +0100
                Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 17:20 +0100
                Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-22 15:20 +0100
                Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-23 12:10 +0100
                Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-23 12:20 +0100
                Re: Synopsys Ethernet QoS Driver Lars Persson <lars.persson@axis.com> - 2016-11-23 12:50 +0100
                Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-23 12:50 +0100
          Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 14:50 +0100
            Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-21 15:40 +0100
              Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-21 16:10 +0100
                Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 16:20 +0100
              Re: Synopsys Ethernet QoS Driver Joao Pinto <Joao.Pinto@synopsys.com> - 2016-11-21 16:10 +0100
              Re: Synopsys Ethernet QoS Driver Giuseppe CAVALLARO <peppe.cavallaro@st.com> - 2016-11-23 09:10 +0100

csiph-web