Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1526655

Re: [PATCH v2 1/2] regulator: max77620: add support to configure MPOK

Show all headers | View raw

On Thu, 17 Nov 2016, Venkat Reddy Talla wrote:

> Adding support to configure regulator POK mapping bit
> to control nRST_IO and GPIO1 POK function.
> In  tegra based platform which uses MAX20024 pmic, when
> some of regulators are configured FPS_NONE(flexible power sequencer)
> causes PMIC GPIO1 to go low which lead to various other rails turning off,
> to avoid this MPOK bit of those regulators need to be set to 0
> so that PMIC GPIO1 will not go low.
> 
> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
> 
> ---
> changes in v2:
> - updated commit message for the patch
> - address review comments
> ---
>  drivers/regulator/max77620-regulator.c | 46 ++++++++++++++++++++++++++++++++++
>  include/linux/mfd/max77620.h           |  2 ++

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

>  2 files changed, 48 insertions(+)
> 
> diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
> index a1b49a6..850b14c 100644
> --- a/drivers/regulator/max77620-regulator.c
> +++ b/drivers/regulator/max77620-regulator.c
> @@ -81,6 +81,7 @@ struct max77620_regulator_pdata {
>  	int suspend_fps_pd_slot;
>  	int suspend_fps_pu_slot;
>  	int current_mode;
> +	int power_ok;
>  	int ramp_rate_setting;
>  };
>  
> @@ -351,11 +352,48 @@ static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id,
>  	return 0;
>  }
>  
> +static int max77620_config_power_ok(struct max77620_regulator *pmic, int id)
> +{
> +	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
> +	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
> +	struct max77620_chip *chip = dev_get_drvdata(pmic->dev->parent);
> +	u8 val, mask;
> +	int ret;
> +
> +	switch (chip->chip_id) {
> +	case MAX20024:
> +		if (rpdata->power_ok >= 0) {
> +			if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
> +				mask = MAX20024_SD_CFG1_MPOK_MASK;
> +			else
> +				mask = MAX20024_LDO_CFG2_MPOK_MASK;
> +
> +			val = rpdata->power_ok ? mask : 0;
> +
> +			ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr,
> +						 mask, val);
> +			if (ret < 0) {
> +				dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
> +					rinfo->cfg_addr, ret);
> +				return ret;
> +			}
> +		}
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>  static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
>  {
>  	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
>  	int ret;
>  
> +	max77620_config_power_ok(pmic, id);
> +
>  	/* Update power mode */
>  	ret = max77620_regulator_get_power_mode(pmic, id);
>  	if (ret < 0)
> @@ -595,6 +633,12 @@ static int max77620_of_parse_cb(struct device_node *np,
>  			np, "maxim,suspend-fps-power-down-slot", &pval);
>  	rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
>  
> +	ret = of_property_read_u32(np, "maxim,power-ok-control", &pval);
> +	if (!ret)
> +		rpdata->power_ok = pval;
> +	else
> +		rpdata->power_ok = -1;
> +
>  	ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval);
>  	rpdata->ramp_rate_setting = (!ret) ? pval : 0;
>  
> @@ -807,6 +851,8 @@ static int max77620_regulator_resume(struct device *dev)
>  	for (id = 0; id < MAX77620_NUM_REGS; id++) {
>  		reg_pdata = &pmic->reg_pdata[id];
>  
> +		max77620_config_power_ok(pmic, id);
> +
>  		max77620_regulator_set_fps_slots(pmic, id, false);
>  		if (reg_pdata->active_fps_src < 0)
>  			continue;
> diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
> index 3ca0af07..ad2a9a8 100644
> --- a/include/linux/mfd/max77620.h
> +++ b/include/linux/mfd/max77620.h
> @@ -180,6 +180,7 @@
>  #define MAX77620_SD_CFG1_FPWM_SD_MASK		BIT(2)
>  #define MAX77620_SD_CFG1_FPWM_SD_SKIP		0
>  #define MAX77620_SD_CFG1_FPWM_SD_FPWM		BIT(2)
> +#define MAX20024_SD_CFG1_MPOK_MASK		BIT(1)
>  #define MAX77620_SD_CFG1_FSRADE_SD_MASK		BIT(0)
>  #define MAX77620_SD_CFG1_FSRADE_SD_DISABLE	0
>  #define MAX77620_SD_CFG1_FSRADE_SD_ENABLE	BIT(0)
> @@ -187,6 +188,7 @@
>  /* LDO_CNFG2 */
>  #define MAX77620_LDO_POWER_MODE_MASK		0xC0
>  #define MAX77620_LDO_POWER_MODE_SHIFT		6
> +#define MAX20024_LDO_CFG2_MPOK_MASK		BIT(2)
>  #define MAX77620_LDO_CFG2_ADE_MASK		BIT(1)
>  #define MAX77620_LDO_CFG2_ADE_DISABLE		0
>  #define MAX77620_LDO_CFG2_ADE_ENABLE		BIT(1)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 1/2] regulator: max77620: add support to configure MPOK Venkat Reddy Talla <vreddytalla@nvidia.com> - 2016-11-17 19:10 +0100
  Re: [PATCH v2 1/2] regulator: max77620: add support to configure MPOK Lee Jones <lee.jones@linaro.org> - 2016-11-21 14:10 +0100
    Re: [PATCH v2 1/2] regulator: max77620: add support to configure MPOK Lee Jones <lee.jones@linaro.org> - 2016-11-21 14:10 +0100
      Re: [PATCH v2 1/2] regulator: max77620: add support to configure MPOK Mark Brown <broonie@kernel.org> - 2016-11-23 17:50 +0100
  Applied "regulator: max77620: add support to configure MPOK" to the regulator tree Mark Brown <broonie@kernel.org> - 2016-11-23 17:40 +0100

csiph-web