Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1524450

Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM

Show all headers | View raw

Le 17/11/2016 à 13:21, Harini Katakam a écrit :
> Hi Rafal,
> 
> On Thu, Nov 17, 2016 at 5:20 PM, Rafal Ozieblo <rafalo@cadence.com> wrote:
>> Hello,
>> I think, there could a bug in your patch.
>>
>>> +
>>> +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
>>> +             dmacfg |= GEM_BIT(ADDR64);
>>> +#endif
>>
>> You enable 64 bit addressing (64b dma bus width) always when appropriate architecture config option is enabled.
>> But there are some legacy controllers which do not support that feature. According Cadence hardware team:
>> "64 bit addressing was added in July 2013. Earlier version do not have it.
>> This feature was enhanced in release August 2014 to have separate upper address values for transmit and receive."
>>
>>> /* Bitfields in NSR */
>>> @@ -474,6 +479,10 @@
>>>  struct macb_dma_desc {
>>  >      u32     addr;
>>>       u32     ctrl;
>>> +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
>>> +     u32     addrh;
>>> +     u32     resvd;
>>> +#endif
>>>  };
>>
>> It will not work for legacy hardware. Old descriptor is 2 words wide, the new one is 4 words wide.
>> If you enable CONFIG_ARCH_DMA_ADDR_T_64BIT but hardware doesn't support it at all,
>> you will miss every second descriptor.
>>
> 
> True, this feature is not available in all of Cadence IP versions.
> In fact, the IP version Zynq does not support this. But the one in ZynqMP does.
> So, we enable kernel config for 64 bit DMA addressing for this SoC and hence
> the driver picks it up. My assumption was that if the legacy IP does not support
> 64 bit addressing, then this DMA option wouldn't be enabled.
> 
> There is a design config register in Cadence IP which is being read to
> check for 64 bit address support - DMA mask is set based on that.
> But the addition of two descriptor words cannot be based on this runtime check.
> For this reason, all the static changes were placed under this check.

We have quite a bunch of options in this driver to determinate what is
the real capacity of the underlying hardware.
If HW configuration registers are not appropriate, and it seems they are
not, I would advice to simply use the DT compatibility string.

Best regards,
-- 
Nicolas Ferre

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-17 13:00 +0100
  Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Nicolas Ferre <nicolas.ferre@atmel.com> - 2016-11-17 15:30 +0100
    RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-17 19:10 +0100
      Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-18 05:40 +0100
        Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Nicolas Ferre <nicolas.ferre@atmel.com> - 2016-11-18 10:20 +0100
          Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-18 10:50 +0100
            Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-18 11:10 +0100
            RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-18 11:20 +0100
              Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Nicolas Ferre <nicolas.ferre@atmel.com> - 2016-11-18 11:20 +0100
            Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Andrei Pistirica <andrei.pistirica@microchip.com> - 2016-11-18 11:20 +0100
              Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-18 11:40 +0100
          RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-18 10:50 +0100
        RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-18 10:40 +0100
          Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-18 11:20 +0100
            RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-18 12:30 +0100
  RE: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Rafal Ozieblo <rafalo@cadence.com> - 2016-11-17 18:40 +0100
  Re: [RFC PATCH 2/2] net: macb: Add 64 bit addressing support for GEM Harini Katakam <harinikatakamlinux@gmail.com> - 2016-11-17 20:10 +0100

csiph-web