Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1520636
| From | Stefan Wahren <stefan.wahren@i2se.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 2/2] ARM: bcm2835: Add names for the Raspberry Pi Zero GPIO lines |
| Date | 2016-11-13 19:20 +0100 |
| Message-ID | <sD7xM-3VR-9@gated-at.bofh.it> (permalink) |
| References | <sD7xL-3VR-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
This adds the GPIO names for the Raspberry Pi Zero. Since there are no
schematics for the RPi Zero use the same as the Model A+.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi | 75 +++++++++++++++++++++++
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 76 +-----------------------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 11 +---
3 files changed, 77 insertions(+), 85 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi b/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
new file mode 100644
index 0000000..741d64d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
@@ -0,0 +1,75 @@
+&gpio {
+ /*
+ * This is based on the unreleased schematic for the Model A+.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "SDA0",
+ "SCL0",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "SDA0",
+ "SCL0",
+ "NC", /* GPIO30 */
+ "NC", /* GPIO31 */
+ "CAM_GPIO1", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "NC", /* GPIO34 */
+ "PWR_LOW_N", /* GPIO35 */
+ "NC", /* GPIO36 */
+ "NC", /* GPIO37 */
+ "USB_LIMIT", /* GPIO38 */
+ "NC", /* GPIO39 */
+ "PWM0_OUT", /* GPIO40 */
+ "CAM_GPIO0", /* GPIO41 */
+ "NC", /* GPIO42 */
+ "NC", /* GPIO43 */
+ "NC", /* GPIO44 */
+ "PWM1_OUT", /* GPIO45 */
+ "HDMI_HPD_N",
+ "STATUS_LED",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+ /* I2S interface */
+ i2s_alt0: i2s_alt0 {
+ brcm,pins = <18 19 20 21>;
+ brcm,function = <BCM2835_FSEL_ALT0>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index d070454..9b665da 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm2835-rpi-a-plus-gpio.dtsi"
/ {
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
@@ -21,81 +22,6 @@
};
};
-&gpio {
- /*
- * This is based on the unreleased schematic for the Model A+.
- *
- * Legend:
- * "NC" = not connected (no rail from the SoC)
- * "FOO" = GPIO line named "FOO" on the schematic
- * "FOO_N" = GPIO line named "FOO" on schematic, active low
- */
- gpio-line-names = "SDA0",
- "SCL0",
- "SDA1",
- "SCL1",
- "GPIO_GCLK",
- "GPIO5",
- "GPIO6",
- "SPI_CE1_N",
- "SPI_CE0_N",
- "SPI_MISO",
- "SPI_MOSI",
- "SPI_SCLK",
- "GPIO12",
- "GPIO13",
- /* Serial port */
- "TXD0",
- "RXD0",
- "GPIO16",
- "GPIO17",
- "GPIO18",
- "GPIO19",
- "GPIO20",
- "GPIO21",
- "GPIO22",
- "GPIO23",
- "GPIO24",
- "GPIO25",
- "GPIO26",
- "GPIO27",
- "SDA0",
- "SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
- "CAM_GPIO1", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "PWR_LOW_N", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "USB_LIMIT", /* GPIO38 */
- "NC", /* GPIO39 */
- "PWM0_OUT", /* GPIO40 */
- "CAM_GPIO0", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
- "PWM1_OUT", /* GPIO45 */
- "HDMI_HPD_N",
- "STATUS_LED",
- /* Used by SD Card */
- "SD_CLK_R",
- "SD_CMD_R",
- "SD_DATA0_R",
- "SD_DATA1_R",
- "SD_DATA2_R",
- "SD_DATA3_R";
-
- pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
- /* I2S interface */
- i2s_alt0: i2s_alt0 {
- brcm,pins = <18 19 20 21>;
- brcm,function = <BCM2835_FSEL_ALT0>;
- };
-};
-
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 7c1c180..0154ae0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -13,6 +13,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm2835-rpi-a-plus-gpio.dtsi"
/ {
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
@@ -25,16 +26,6 @@
};
};
-&gpio {
- pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
- /* I2S interface */
- i2s_alt0: i2s_alt0 {
- brcm,pins = <18 19 20 21>;
- brcm,function = <BCM2835_FSEL_ALT0>;
- };
-};
-
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
--
1.7.9.5
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/2] ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines Stefan Wahren <stefan.wahren@i2se.com> - 2016-11-13 19:20 +0100
[PATCH 2/2] ARM: bcm2835: Add names for the Raspberry Pi Zero GPIO lines Stefan Wahren <stefan.wahren@i2se.com> - 2016-11-13 19:20 +0100
Re: [PATCH 2/2] ARM: bcm2835: Add names for the Raspberry Pi Zero GPIO lines Eric Anholt <eric@anholt.net> - 2016-11-15 18:30 +0100
Re: [PATCH 2/2] ARM: bcm2835: Add names for the Raspberry Pi Zero GPIO lines Stefan Wahren <stefan.wahren@i2se.com> - 2016-11-16 17:40 +0100
csiph-web