Re: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY nodes in Pine64

From	Maxime Ripard <maxime.ripard@free-electrons.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY nodes in Pine64
Date	2016-11-06 20:00 +0100
Message-ID	<sAAPD-Gs-1@gated-at.bofh.it> (permalink)
References	<sAAPD-Gs-3@gated-at.bofh.it> <sAAPD-Gs-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Hi,

On Sat, Nov 05, 2016 at 10:38:30PM +0800, Icenowy Zheng wrote:
> Pine64 have two USB Type-A ports, which are wired to the two ports of
> A64 USB PHY, and the lower port is the EHCI/OHCI1 port.
> 
> Enable the necessary nodes to enable the lower USB port to work.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> index 4709590..d836995 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> @@ -72,3 +72,15 @@
>  &i2c1_pins {
>  	bias-pull-up;
>  };
> +
> +&usbphy {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};

Please order the nodes by alphebetical order.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 2/2] arm64: dts: sunxi: enable EHCI1, OHCI1 and USB PHY  nodes in Pine64 Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-11-06 20:00 +0100

csiph-web