[PATCH v2 0/3] Add DSP control nodes for K2G

From	"Andrew F. Davis" <afd@ti.com>
Newsgroups	linux.kernel
Subject	[PATCH v2 0/3] Add DSP control nodes for K2G
Date	2016-08-09 16:40 +0200
Message-ID	<s4gmd-n3-1@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

Hello all,

This series adds the nodes needed to control the DSP available on
this SoC. These are similar to the nodes already present the
other K2x SoCs.

Thanks,
Andrew

Andrew F. Davis (3):
  ARM: dts: keystone-k2g: Add device state controller node
  ARM: dts: keystone-k2g: Add keystone IRQ controller node
  ARM: dts: keystone-k2g: Add DSP GPIO controller node

 arch/arm/boot/dts/keystone-k2g.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

-- 
2.9.2

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 0/3] Add DSP control nodes for K2G "Andrew F. Davis" <afd@ti.com> - 2016-08-09 16:40 +0200
  [PATCH v2 1/3] ARM: dts: keystone-k2g: Add device state controller node "Andrew F. Davis" <afd@ti.com> - 2016-08-09 16:40 +0200
  [PATCH v2 2/3] ARM: dts: keystone-k2g: Add keystone IRQ controller node "Andrew F. Davis" <afd@ti.com> - 2016-08-09 16:40 +0200
  [PATCH v2 3/3] ARM: dts: keystone-k2g: Add DSP GPIO controller node "Andrew F. Davis" <afd@ti.com> - 2016-08-09 16:40 +0200
  Re: [PATCH v2 0/3] Add DSP control nodes for K2G Santosh Shilimkar <santosh.shilimkar@oracle.com> - 2016-08-09 17:50 +0200

csiph-web