Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1459878
| From | Rafał Miłecki <zajec5@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock |
| Date | 2016-08-10 22:40 +0200 |
| Message-ID | <s4Gqn-b4-87@gated-at.bofh.it> (permalink) |
| References | <s4G72-8uN-145@gated-at.bofh.it> <s4GgI-79-115@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 10 August 2016 at 19:22, Jon Mason <jon.mason@broadcom.com> wrote:
> On Wed, Aug 10, 2016 at 8:05 AM, Rafał Miłecki <zajec5@gmail.com> wrote:
>> diff --git a/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
>> new file mode 100644
>> index 0000000..a18c73f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
>> @@ -0,0 +1,40 @@
>> +Broadcom Northstar ILP clock
>> +============================
>> +
>> +This binding uses the common clock binding:
>> + Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +This binding is used for ILP clock (sometimes referred as "slow clock")
>> +on Broadcom Northstar devices using Corex-A7 CPU.
>> +
>> +This clock is part of PMU (Power Management Unit), a Broadcom's device
>> +handing power-related aspects. Please note PMU contains more subdevices,
>> +ILP is only one of them.
>> +
>> +ILP's rate has to be calculated on runtime and it depends on ALP clock
>> +which has to be referenced.
>> +
>> +Required properties:
>> +- compatible: "brcm,ns-ilp"
>> +- reg: iomem address range of PMU (Power Management Unit)
>> +- reg-names: "pmu", the only needed & supported reg right now
>> +- clocks: has to reference an ALP clock
>> +- #clock-cells: should be <0>
>> +
>> +Example:
>> +
>> +pmu@18012000 {
>> + compatible = "simple-bus";
>> + ranges = <0x00000000 0x18012000 0x00001000>;
>
> I don't see a corresponding DT entry in this patch, but 18012000 is
> the PCI block. So, I am concerned this will collide if used there.
>
> I looked at the NS register reference guide, and I cannot find the
> registers you are trying to reference. Is this supposed to be
> referencing the LCPLL clock registers in DMU? If so, there is already
> a driver in there for this (see drivers/clk/bcm/clk-nsp.c).
This patch is for BCM53573 family, not BCM4708 family you are looking at.
Found chip with id 53573, rev 0x02 and package 0x01
Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x36, class 0x0)
Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x38, class 0x0)
Core 2 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x05, class 0x0)
Core 3 found: ARM CA7 (manuf 0x4BF, id 0x847, rev 0x00, class 0x0)
Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x05, class 0x0)
Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x08, class 0x0)
Core 6 found: I2S (manuf 0x4BF, id 0x834, rev 0x06, class 0x0)
Core 7 found: CNDS DDR2/3 memory controller (manuf 0x4BF, id 0x846,
rev 0x00, class 0x0)
Core 8 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
Core 9 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x38, class 0x0)
Core 10 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x08, class 0x0)
Core 11 found: I2S (manuf 0x4BF, id 0x834, rev 0x06, class 0x0)
Core 12 found: GCI (manuf 0x4BF, id 0x840, rev 0x08, class 0x0)
Core 13 found: PMU (manuf 0x4BF, id 0x827, rev 0x1C, class 0x0)
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH V3] clk: bcm: Add driver for Northstar ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-10 20:10 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Jon Mason <jon.mason@broadcom.com> - 2016-08-10 20:20 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Jon Mason <jon.mason@broadcom.com> - 2016-08-10 20:30 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-11 11:00 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Jon Mason <jon.mason@broadcom.com> - 2016-08-11 16:30 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-12 08:30 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Ray Jui <ray.jui@broadcom.com> - 2016-08-10 22:40 +0200
Re: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-10 22:40 +0200
[PATCH V4] clk: bcm: Add driver for BCM53573 ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-23 08:30 +0200
[PATCH V5] clk: bcm: Add driver for BCM53573 ILP clock Rafał Miłecki <zajec5@gmail.com> - 2016-08-23 08:30 +0200
Re: [PATCH V5] clk: bcm: Add driver for BCM53573 ILP clock Rob Herring <robh@kernel.org> - 2016-08-23 22:20 +0200
Re: [PATCH V5] clk: bcm: Add driver for BCM53573 ILP clock Stephen Boyd <sboyd@codeaurora.org> - 2016-08-24 11:00 +0200
csiph-web