Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1457553

Re: [PATCH v3 3/3] serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 soc

Show all headers | View raw

+ kernel malilist

Hi Andriy and all, any comments, thanks.

On 2016/7/15 19:01, Kefeng Wang wrote:
> Use built-in device properties to set device parameters for the
> existing device probed by acpi.
> 
> Add ACPI identifier for UART on Hisilicon Hip05 soc, be careful
> that it is not 16550 compatibal, so we need set "reg-io-width"
> and "reg-shift" by _DSD method in DSDT.
> 
> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
> ---
>  drivers/tty/serial/8250/8250_dw.c | 23 +++++++++++++++++------
>  1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index d6934310..5ab9cfe 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -297,12 +297,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>  			p->serial_in = dw8250_serial_in32be;
>  			p->serial_out = dw8250_serial_out32be;
>  		}
> -	} else if (has_acpi_companion(p->dev)) {
> -		p->iotype = UPIO_MEM32;
> -		p->regshift = 2;
> -		p->serial_in = dw8250_serial_in32;
> -		/* So far none of there implement the Busy Functionality */
> -		data->uart_16550_compatible = true;
>  	}
>  
>  	/* Platforms with iDMA */
> @@ -352,6 +346,19 @@ static void dw8250_setup_port(struct uart_port *p)
>  		up->capabilities |= UART_CAP_AFE;
>  }
>  
> +static struct property_entry dw8250_properties[] = {
> +	PROPERTY_ENTRY_U32("reg-io-width", 4),
> +	PROPERTY_ENTRY_U32("reg-shift", 2),
> +	PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
> +	{ },
> +};
> +
> +/* non 16550 compatible id list*/
> +static const struct acpi_device_id non_16550_ids[] = {
> +	{ "HISI0031", 0 },
> +	{ },
> +};
> +
>  static int dw8250_probe(struct platform_device *pdev)
>  {
>  	struct uart_8250_port uart = {};
> @@ -395,6 +402,9 @@ static int dw8250_probe(struct platform_device *pdev)
>  	if (!data)
>  		return -ENOMEM;
>  
> +	if (has_acpi_companion(dev) && !acpi_match_device(non_16550_ids, dev))
> +		platform_device_add_properties(pdev, dw8250_properties);
> +
>  	data->dma.fn = dw8250_fallback_dma_filter;
>  	data->usr_reg = DW_UART_USR;
>  	p->private_data = data;
> @@ -619,6 +629,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = {
>  	{ "APMC0D08", 0},
>  	{ "AMD0020", 0 },
>  	{ "AMDI0020", 0 },
> +	{ "HISI0031", 0 },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
> 

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v3 3/3] serial: 8250_dw: add ACPI support for uart on  Hisilicon Hip05 soc Kefeng Wang <wangkefeng.wang@huawei.com> - 2016-08-08 08:20 +0200

csiph-web