Linux v4.6 does not work with Centos 7 (Radeon) but works with Linux v4.5

From	Jeff Merkey <linux.mdb@gmail.com>
Newsgroups	linux.kernel
Subject	Linux v4.6 does not work with Centos 7 (Radeon) but works with Linux v4.5
Date	2016-05-16 05:50 +0200
Message-ID	<rzhHz-1GO-1@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

A lot of breakage for Building v4.6 on Centos 7.

The following error occurs after booting Linux v4.6 on Centos 7 with a
Radeon Adapter:

R600_cp:  Failed to load Firmware "Radeon/R600_rlc.bin
FATAL Error during GPU init.

Linux v4.5 works fine.  Also of note, someone moved some scripts
around resulting in and error during kernel install.  This build was
with "make localmodconfig":

scripts/kconfig/conf  --silentoldconfig Kconfig
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CHK     include/generated/uapi/linux/version.h
  TEST    posttest
Succeed: decoded and checked 1795748 instructions
  TEST    posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000
random instructions with 0 errors (seed:0x399955f4)
Kernel: arch/x86/boot/bzImage is ready  (#7)
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  GZIP    kernel/config_data.gz
  CHK     kernel/config_data.h
  UPD     kernel/config_data.h
  CC [M]  kernel/configs.o
  Building modules, stage 2.
  MODPOST 32 modules
  CC      kernel/configs.mod.o
  LD [M]  kernel/configs.ko
  INSTALL arch/x86/kernel/debug/mdb/mdb.ko
  INSTALL drivers/ata/acard-ahci.ko
  INSTALL drivers/ata/ahci.ko
  INSTALL drivers/ata/ahci_platform.ko
  INSTALL drivers/ata/ata_generic.ko
  INSTALL drivers/ata/libahci.ko
  INSTALL drivers/ata/libahci_platform.ko
  INSTALL drivers/ata/libata.ko
  INSTALL drivers/ata/pata_acpi.ko
  INSTALL drivers/ata/pata_atiixp.ko
  INSTALL drivers/base/regmap/regmap-i2c.ko
  INSTALL drivers/gpu/drm/drm.ko
  INSTALL drivers/gpu/drm/drm_kms_helper.ko
  INSTALL drivers/gpu/drm/radeon/radeon.ko
  INSTALL drivers/gpu/drm/ttm/ttm.ko
  INSTALL drivers/i2c/algos/i2c-algo-bit.ko
  INSTALL drivers/i2c/i2c-core.ko
  INSTALL drivers/input/serio/serio_raw.ko
  INSTALL drivers/net/ethernet/realtek/r8169.ko
  INSTALL drivers/net/mii.ko
  INSTALL drivers/scsi/sd_mod.ko
  INSTALL drivers/usb/storage/usb-storage.ko
  INSTALL drivers/video/fbdev/core/fb_sys_fops.ko
  INSTALL drivers/video/fbdev/core/syscopyarea.ko
  INSTALL drivers/video/fbdev/core/sysfillrect.ko
  INSTALL drivers/video/fbdev/core/sysimgblt.ko
  INSTALL drivers/xen/tmem.ko
  INSTALL drivers/xen/xen-privcmd.ko
  INSTALL fs/ext4/ext4.ko
  INSTALL fs/jbd2/jbd2.ko
  INSTALL fs/mbcache.ko
  INSTALL kernel/configs.ko
  DEPMOD  4.6.0
sh ./arch/x86/boot/install.sh 4.6.0 arch/x86/boot/bzImage \
	System.map "/boot"
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 4:
/lib/kdump/kdump-lib.sh: No such file or directory
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 4:
/lib/kdump/kdump-lib.sh: No such file or directory


Jeff

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Linux v4.6 does not work with Centos 7 (Radeon) but works with Linux v4.5 Jeff Merkey <linux.mdb@gmail.com> - 2016-05-16 05:50 +0200
  Re: Linux v4.6 does not work with Centos 7 (Radeon) but works with  Linux v4.5 Jeff Merkey <linux.mdb@gmail.com> - 2016-05-16 19:40 +0200
    Re: Linux v4.6 does not work with Centos 7 (Radeon) but works with  Linux v4.5 Jeff Merkey <linux.mdb@gmail.com> - 2016-05-16 23:10 +0200

csiph-web