Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc

From	Olliver Schinagl <oliver@schinagl.nl>
Newsgroups	linux.kernel
Subject	Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
Date	2016-05-09 12:00 +0200
Message-ID	<rwQ8O-2SQ-3@gated-at.bofh.it> (permalink)
References	<rvnsd-5xz-1@gated-at.bofh.it> <rwBjs-3l0-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hey Maxime,

On 08-05-16 20:09, Maxime Ripard wrote:
> On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote:
>> There are 3 kinds of OLinuXino Lime2 boards.
>> One without any on board storage, one with NAND storage and one with
>> eMMC storage. This patch adds the eMMC variant of boards.
>>
>> eMMC storage is different from a regular SD card in that it is soldered
>> on the board and cannot be changed. Additionally, it shares pins with
>> the NAND module and with the second SPI port.
>>
>> Changeslog:
>>
>> v4:
>>    Add board compatibles
>>
>> v3:
>>    Add pwr-seq-emmc with the reset gpio
>>
>> v2:
>>    Remove unsupported no-1.8-v property, add vqmmc property
>>
>> v1:
>>    Initial bare bone version
> This is not something we want in the commit log. This should go below
> the --- so that it's dropped when applied.
Sorry about that, I didn't know the --- trick. ChenYu reminded of it 
however, so that'll go into my toolblox.
>
> Removed and applied.
Thanks for fixing it, much appreciated :)
>
> Thanks,
> Maxime
>

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Olliver Schinagl <oliver@schinagl.nl> - 2016-05-05 11:10 +0200
  Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-05-08 20:10 +0200
    Re: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Olliver Schinagl <oliver@schinagl.nl> - 2016-05-09 12:00 +0200

csiph-web