Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1396627
| From | Wei Ni <wni@nvidia.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v4 06/11] arm64: tegra: use tegra132-soctherm for Tegra132 |
| Date | 2016-05-09 09:00 +0200 |
| Message-ID | <rwNkD-7Aw-29@gated-at.bofh.it> (permalink) |
| References | <rwNkC-7Aw-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The Tegra132 has the specific settings for soctherm,
so change to use campatible "nvidia,tegra132-soctherm" for it.
And adds cpu, gpu, mem and pllx thermal zones.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 36 ++++++++++++++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 2013f8916084..e41d8e82d7ed 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
/ {
compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,8 @@
};
soctherm: thermal-sensor@700e2000 {
- compatible = "nvidia,tegra124-soctherm";
- reg = <0x0 0x700e2000 0x0 0x1000>;
+ compatible = "nvidia,tegra132-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x600>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -738,6 +739,37 @@
#thermal-sensor-cells = <1>;
};
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+ };
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+ };
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+ };
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+ };
+ };
+
ahub@70300000 {
compatible = "nvidia,tegra124-ahub";
reg = <0x0 0x70300000 0x0 0x200>,
--
1.9.1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v4 00/11] Add HW throttle for Tegra soctherm Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200 [PATCH v4 08/11] arm64: tegra: set hot trips for Tegra132 Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200 [PATCH v4 06/11] arm64: tegra: use tegra132-soctherm for Tegra132 Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200 [PATCH v4 07/11] arm64: tegra: set critical trips for Tegra132 Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200 [PATCH v4 04/11] arm: tegra: set critical trips for Tegra124 Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200 [PATCH v4 11/11] arm64: tegra: set hot trips for Tegra210 Wei Ni <wni@nvidia.com> - 2016-05-09 09:00 +0200
csiph-web