Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1395239

Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs

Show all headers | View raw

On Thu, May 05, 2016 at 07:06:02PM +0200, Daniel Vetter wrote:
> On Thu, May 05, 2016 at 05:13:38PM +0100, Robin Murphy wrote:
> > The current PM ops simply unconditionally enable/disable the HDLCD,
> > which proves problematic when there is no display plugged in - since
> > without a crtc the hardware itself is still in an uninitialised state,
> > coming out of suspend results in it being enabled without a valid
> > framebuffer address, which typically results in it trying to scan out
> > from bus address 0 and flooding the system with error interrupts.
> > 
> > Fix this by checking the crtc state on resume, and only enabling the
> > hardware if it's actually supposed to be. For the sake of consistency,
> > do the same on the suspend path as well, although there it's merely a
> > case of skipping unnecessary work.
> > 
> > CC: Liviu Dudau <liviu.dudau@arm.com>
> > Signed-off-by: Robin Murphy <robin.murphy@arm.com>
> > ---
> >  drivers/gpu/drm/arm/hdlcd_crtc.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
> > index fef1b04c2aab..bf6ff5e48adc 100644
> > --- a/drivers/gpu/drm/arm/hdlcd_crtc.c
> > +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
> > @@ -296,12 +296,14 @@ static struct drm_plane *hdlcd_plane_init(struct drm_device *drm)
> >  
> >  void hdlcd_crtc_suspend(struct drm_crtc *crtc)
> >  {
> > -	hdlcd_crtc_disable(crtc);
> > +	if (crtc->state->active)
> > +		hdlcd_crtc_disable(crtc);
> >  }
> >  
> >  void hdlcd_crtc_resume(struct drm_crtc *crtc)
> >  {
> > -	hdlcd_crtc_enable(crtc);
> > +	if (crtc->state->active)
> > +		hdlcd_crtc_enable(crtc);
> >  }
> 
> If you use the atomic helpers to suspend/resume your entire display
> pipeline these callbacks shouldn't even be needed at all. Tried just
> removing them?

Yes, I need to cleanup the PM code in HDLCD.

Thanks,
Liviu


> -Daniel
> 
> >  
> >  int hdlcd_setup_crtc(struct drm_device *drm)
> > -- 
> > 2.8.1.dirty
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs Robin Murphy <robin.murphy@arm.com> - 2016-05-05 18:20 +0200
  Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs liviu.dudau@arm.com - 2016-05-05 19:00 +0200
  Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs Daniel Vetter <daniel@ffwll.ch> - 2016-05-05 19:10 +0200
    Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs liviu.dudau@arm.com - 2016-05-05 19:20 +0200
    Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs Robin Murphy <robin.murphy@arm.com> - 2016-05-05 20:10 +0200

csiph-web