Re: Watchdog reset trigger for eMMC

From	Anand Moon <linux.amoon@gmail.com>
Newsgroups	linux.kernel
Subject	Re: Watchdog reset trigger for eMMC
Date	2016-05-03 04:40 +0200
Message-ID	<ruypH-7Qa-3@gated-at.bofh.it> (permalink)
References	<rtwgi-2Us-3@gated-at.bofh.it> <rufwK-6Ok-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi Marek

On 2 May 2016 at 11:57, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
> Hi Anand
>
>
> On 2016-04-30 08:06, Anand Moon wrote:
>>
>> Hi All,
>>
>> Using microSD card when I try to write into /dev/watchdog device
>> it triggers reboot of the board after timer expires.
>>
>> -----------------------------------------------------------------------------------------------
>> root@odroidxu4l:~# echo 3 > /dev/watchdog
>> [ 1659.021844] watchdog: watchdog0: watchdog did not stop!
>> root@odroidxu4l:~#
>> root@odroidxu4l:~#
>> root@odroidxu4l:~#
>> root@odroidxu4l:~#
>> root@odroidxu4l:~#
>>
>> U-Boot 2016.03-00665-g563d8d9-dirty (Apr 04 2016 - 22:27:07 +0930) for
>> ODROID-XU
>>                  3
>>
>> CPU:   Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Type:  xu4
>> DRAM:  2 GiB
>>
>> -----------------------------------------------------------------------------------------------
>> But when I try this on eMMC it just freezes.
>> I know we have to set and unset gpio pin (SD_0.RST) to trigger reset
>> before reboot.
>>
>> -----------------------------------------------------------------------------------------------
>> root@odroidxu4e:~# echo 4 > /dev/watchdog
>> [  639.192617] [c3] watchdog watchdog0: watchdog did not stop!
>> root@odroidxu4e:~#
>> root@odroidxu4e:~#
>> root@odroidxu4e:~#
>>
>> -----------------------------------------------------------------------------------------------
>> I would like to know what is way board reset after watchdog reset after
>> timeout.
>
>
> In my opinion hw watchdog reset is non-functional on Odroid U3/XU3/XU4
> boards due to
> hardware design (eMMC reset line triggered from software). I see no way to
> workaround
> this issue in the software.
>
> Best regards
> --
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
>

Yes It's difficult to reset eMMC card.
Thanks for clarification.

Best Regards
-Anand Moon

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Watchdog reset trigger for eMMC Anand Moon <linux.amoon@gmail.com> - 2016-04-30 08:10 +0200
  Re: Watchdog reset trigger for eMMC Marek Szyprowski <m.szyprowski@samsung.com> - 2016-05-02 08:30 +0200
    Re: Watchdog reset trigger for eMMC Anand Moon <linux.amoon@gmail.com> - 2016-05-03 04:40 +0200

csiph-web