Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1392071

Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent

Show all headers | View raw

On 30.04.2016 11:28, Martin Sperl wrote:
>> On 26.04.2016, at 21:39, Eric Anholt <eric@anholt.net> wrote:
>>
>> If the firmware had set up a clock to source from PLLC, go along with
>> it.  But if we're looking for a new parent, we don't want to switch it
>> to PLLC because the firmware will force PLLC (and thus the AXI bus
>> clock) to different frequencies during over-temp/under-voltage,
>> without notification to Linux.
>>
>> On my system, this moves the Linux-enabled HDMI state machine and DSI1
>> escape clock over to plld_per from pllc_per.  EMMC still ends up on
>> pllc_per, because the firmware had set it up to use that.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
>> —
> I guess this patch looks to me as if it is a policy inside the kernel,
> which is AFAIK frowned upon.
>
> I am looking into making "assigned-clock-parents” inside the dt
> work with the driver.
>
> Could look something like this:
> i2s: i2s@7e203000 {
> 	assigned-clock-parents = <&cprman BCM2835_PLLD_PER>, <&clk_osc>;
> 	assigned-clocks = <&cprman BCM2835_CLOCK_PCM>, <&cprman BCM2835_CLOCK_PCM>;
> };
> (not sure if that works really - the same clock in assigned-clocks looks suspicious)
>
> This would move the policy out of the kernel into the device-tree,
> which - i guess is a better solution.

So after some more investigation it seems that we can not really use those
assigned-clock-parents properties for our purpose of filtering the parent
clocks, as it:
a) requires also assigned-clocks to be set (this may be OK)
b) it does not allow to define a list of clocks to get used - it will 
just set the
     parent of the assigned-clock - if we take the example shown above, 
it would
     call clk_set_parent 2 times for the PCM clock - once with PLLD_PER
     and once with clk_osc.

So I start to wonder if it would not be better to use an approach like this:
cprman: cprman@7e101000 {
     ...
     brcm,clock-flags = <flags for PCM>, <flags for PWM>;
     brcm,clock-index = <BCM2835_CLOCK_PCM>, <BCM2835_CLOCK_PWM>;
}

the flags would be a bitfield that select the parent clocks.

So it could look like this:
cprman: cprman@7e101000 {
     ...
     brcm,clock-flags = (BIT(BCM2835_PER_PARENT_OSC) |
BIT(BCM2835_PER_PARENT_PLLD_PER)), ...;
     brcm,clock-index = <BCM2835_CLOCK_PCM>, <BCM2835_CLOCK_PWM>;
}

BCM2835_PER_PARENT_PLLD_PER and BCM2835_PER_PARENT_OSC
would then be defined in include/dt-bindings/clock/bcm2835.h

In addition this would also allow us to add other flags to enable
higher order MASH clock dividers - we currently only allow simple
fractional dividers - we could even force the use of integer dividers
if there comes a need.

This would really allow us to define the parents freely and if the
firmware ever changes its behavior with regards to PLLC, then we can
easily change the device-tree.

Is this approach acceptable - maybe in a variation?

Thanks,
                     Martin

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent Martin Sperl <kernel@martin.sperl.org> - 2016-04-30 11:30 +0200
  Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new  clock parent Martin Sperl <martin@sperl.org> - 2016-05-02 11:00 +0200
  Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent Eric Anholt <eric@anholt.net> - 2016-05-02 17:30 +0200
    Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent Martin Sperl <kernel@martin.sperl.org> - 2016-05-02 18:40 +0200
      Re: [PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent Eric Anholt <eric@anholt.net> - 2016-05-03 03:10 +0200

csiph-web