Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.

From	Greg KH <gregkh@linuxfoundation.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs.
Date	2016-04-29 17:20 +0200
Message-ID	<rtimZ-8fU-5@gated-at.bofh.it> (permalink)
References	<rt2rU-3gl-13@gated-at.bofh.it> <rt2rU-3gl-11@gated-at.bofh.it> <rt34C-3xI-5@gated-at.bofh.it> <rtbOx-2Gn-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Fri, Apr 29, 2016 at 09:10:06AM +0100, Richard W.M. Jones wrote:
> On Thu, Apr 28, 2016 at 03:56:33PM -0700, Greg KH wrote:
> > On Thu, Apr 28, 2016 at 11:18:33PM +0100, Richard W.M. Jones wrote:
> > > Currently autoconf spends 25ms (on my laptop) testing if the UART
> > > exported to it by KVM is an 8250 without FIFO and/or with strange
> > > quirks, which it obviously isn't.  Assume it is exported to us by a
> > > hypervisor, it's a normal, working 16550A.
> > > 
> > > Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
> > > ---
> > >  drivers/tty/serial/8250/8250_port.c | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> > > index 00ad2637..de19924 100644
> > > --- a/drivers/tty/serial/8250/8250_port.c
> > > +++ b/drivers/tty/serial/8250/8250_port.c
> > > @@ -1171,6 +1171,13 @@ static void autoconfig(struct uart_8250_port *up)
> > >  	if (!port->iobase && !port->mapbase && !port->membase)
> > >  		return;
> > >  
> > > +	/* Hypervisors always export working 16550A devices. */
> > > +	if (cpu_has_hypervisor) {
> > > +		up->port.type = PORT_16550A;
> > > +		up->capabilities |= UART_CAP_FIFO;
> > > +		return;
> > > +	}
> > 
> > Have you audited vmware, virtualbox, and everyone else that provides a
> > virtual uart device that it will work properly here?
> > 
> > qemu isn't all the world :)
> 
> Attached below is a slightly different approach.  If the user passes a
> special flag on the kernel command line then we force 16550A and avoid
> the 25ms delay.  Since the user chooses the flag, any concerns about
> the behaviour of the hypervisor or use of VFIO should be moot.

No, no more module parameters, that's crazy, what happens when you have
64 serial ports in a system, which one is this option for?

greg k-h

Thread

[PATCH] 8250: Hypervisors always export working 16550A UARTs. "Richard W.M. Jones" <rjones@redhat.com> - 2016-04-29 00:20 +0200
  Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. Greg KH <gregkh@linuxfoundation.org> - 2016-04-29 01:00 +0200
    Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. "Richard W.M. Jones" <rjones@redhat.com> - 2016-04-29 10:20 +0200
      Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. Greg KH <gregkh@linuxfoundation.org> - 2016-04-29 17:20 +0200
        Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. "Richard W.M. Jones" <rjones@redhat.com> - 2016-04-29 17:40 +0200
          Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. Greg KH <gregkh@linuxfoundation.org> - 2016-04-29 18:00 +0200
            Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. "Richard W.M. Jones" <rjones@redhat.com> - 2016-04-29 18:10 +0200
              Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. Greg KH <gregkh@linuxfoundation.org> - 2016-04-29 19:40 +0200
          Re: [PATCH] 8250: Hypervisors always export working 16550A UARTs. Don Dutile <ddutile@redhat.com> - 2016-04-29 20:20 +0200

csiph-web