Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1389083

Re: [PATCH] net: phy: at803x: Register 'link_change_notify' only for AT8030

Show all headers | View raw

Hi,

Sergei pointed out that the same patch was submitted yesterday by Timur (what are the chances?! :-) ) https://patchwork.ozlabs.org/patch/615019/

Regards,

Sebastian

On 04/27/2016 01:34 PM, Sebastian Frias wrote:
> There is no need to register the callback introduced by
> commit 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
> for non faulty PHYs.
> 
> The check on the PHY ID is not necessary anymore and thus has been
> removed from the callback implementation as well.
> 
> Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
> 
> Signed-off-by: Sebastian Frias <sf84@laposte.net>
> ---
>  drivers/net/phy/at803x.c | 43 ++++++++++++++++++++-----------------------
>  1 file changed, 20 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index b3ffaee..7fdc676 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -353,33 +353,32 @@ static void at803x_link_change_notify(struct phy_device *phydev)
>  	struct at803x_priv *priv = phydev->priv;
>  
>  	/*
> -	 * Conduct a hardware reset for AT8030 every time a link loss is
> +	 * Conduct a hardware reset for AT8030 (this callback is only
> +	 * registered for AT8030 at the moment) every time a link loss is
>  	 * signalled. This is necessary to circumvent a hardware bug that
>  	 * occurs when the cable is unplugged while TX packets are pending
>  	 * in the FIFO. In such cases, the FIFO enters an error mode it
>  	 * cannot recover from by software.
>  	 */
> -	if (phydev->drv->phy_id == ATH8030_PHY_ID) {
> -		if (phydev->state == PHY_NOLINK) {
> -			if (priv->gpiod_reset && !priv->phy_reset) {
> -				struct at803x_context context;
> -
> -				at803x_context_save(phydev, &context);
> -
> -				gpiod_set_value(priv->gpiod_reset, 1);
> -				msleep(1);
> -				gpiod_set_value(priv->gpiod_reset, 0);
> -				msleep(1);
> -
> -				at803x_context_restore(phydev, &context);
> -
> -				phydev_dbg(phydev, "%s(): phy was reset\n",
> -					   __func__);
> -				priv->phy_reset = true;
> -			}
> -		} else {
> -			priv->phy_reset = false;
> +	if (phydev->state == PHY_NOLINK) {
> +		if (priv->gpiod_reset && !priv->phy_reset) {
> +			struct at803x_context context;
> +
> +			at803x_context_save(phydev, &context);
> +
> +			gpiod_set_value(priv->gpiod_reset, 1);
> +			msleep(1);
> +			gpiod_set_value(priv->gpiod_reset, 0);
> +			msleep(1);
> +
> +			at803x_context_restore(phydev, &context);
> +
> +			phydev_dbg(phydev, "%s(): phy was reset\n",
> +				   __func__);
> +			priv->phy_reset = true;
>  		}
> +	} else {
> +		priv->phy_reset = false;
>  	}
>  }
>  
> @@ -391,7 +390,6 @@ static struct phy_driver at803x_driver[] = {
>  	.phy_id_mask		= 0xffffffef,
>  	.probe			= at803x_probe,
>  	.config_init		= at803x_config_init,
> -	.link_change_notify	= at803x_link_change_notify,
>  	.set_wol		= at803x_set_wol,
>  	.get_wol		= at803x_get_wol,
>  	.suspend		= at803x_suspend,
> @@ -427,7 +425,6 @@ static struct phy_driver at803x_driver[] = {
>  	.phy_id_mask		= 0xffffffef,
>  	.probe			= at803x_probe,
>  	.config_init		= at803x_config_init,
> -	.link_change_notify	= at803x_link_change_notify,
>  	.set_wol		= at803x_set_wol,
>  	.get_wol		= at803x_get_wol,
>  	.suspend		= at803x_suspend,
> 

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] net: phy: at803x: Register 'link_change_notify' only for  AT8030 Sebastian Frias <sf84@laposte.net> - 2016-04-27 14:00 +0200
  Re: [PATCH] net: phy: at803x: Register 'link_change_notify' only  for AT8030 Sebastian Frias <sf84@laposte.net> - 2016-04-27 16:00 +0200

csiph-web