Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz

From	Tony Lindgren <tony@atomide.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz
Date	2016-04-26 20:00 +0200
Message-ID	<rsfrc-3gJ-13@gated-at.bofh.it> (permalink)
References	<rpYEa-7aC-15@gated-at.bofh.it> <rpYEa-7aC-17@gated-at.bofh.it> <rqP5M-7go-19@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

* Rob Herring <robh@kernel.org> [160422 12:35]:
> On Wed, Apr 20, 2016 at 05:03:00PM +0530, Vignesh R wrote:
> > According to Data Manual(SPRS915P) of AM57x, TI QSPI controller on
> > DRA74(rev 1.1+)/DRA72 EVM can support up to 64MHz in MODE-0, whereas
> > MODE-3 is limited to 48MHz. Hence, switch to MODE-0 for better
> > throughput.
> > 
> > Signed-off-by: Vignesh R <vigneshr@ti.com>
> > ---
> > 
> > v2: rebased on linux-next 20160419 to include moving to
> > dra72-evm-common.dtsi
> > 
> > 
> >  Documentation/devicetree/bindings/spi/ti_qspi.txt | 7 +++++++
> >  arch/arm/boot/dts/dra7-evm.dts                    | 6 ++----
> >  arch/arm/boot/dts/dra72-evm-common.dtsi           | 6 ++----
> >  3 files changed, 11 insertions(+), 8 deletions(-)
> 
> Acked-by: Rob Herring <robh@kernel.org>

Applying both into omap-for-v4.7/dt thanks.

Tony

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz Vignesh R <vigneshr@ti.com> - 2016-04-20 13:40 +0200
  Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at  64MHz Rob Herring <robh@kernel.org> - 2016-04-22 21:40 +0200
    Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at  64MHz Tony Lindgren <tony@atomide.com> - 2016-04-26 20:00 +0200

csiph-web