Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1387766

[PATCH 1/2 v3] device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey

From John Stultz <john.stultz@linaro.org>
Newsgroups linux.kernel
Subject [PATCH 1/2 v3] device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
Date 2016-04-26 19:50 +0200
Message-ID <rsfhv-3db-3@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


Since the pmic8xxx-pwrkey driver is already supported in the
qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
configure proper device shutdown when ps_hold goes low, it is
better to use that driver then a generic gpio button.

Thus this patch remove the gpio power key entry here, so we
don't get double input events from having two drivers enabled.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2:
- Added wakeup-source entry as suggested by
   Sudeep Holla <sudeep.holla@arm.com>
v3:
- Dropped the entire debounce override, as
  that was found to be a bug in the driver
  that Stephen has since fixed

 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index c535b3f..751aded 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -29,12 +29,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		power {
-			label = "Power";
-			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
 		volume_up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
-- 
1.9.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread


Thread

[PATCH 1/2 v3] device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey John Stultz <john.stultz@linaro.org> - 2016-04-26 19:50 +0200

csiph-web