[PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module

From	Javier Martinez Canillas <javier@osg.samsung.com>
Newsgroups	linux.kernel
Subject	[PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module
Date	2016-04-26 19:30 +0200
Message-ID	<rseYb-34w-41@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

 drivers/i2c/busses/i2c-nforce2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 70b3c9158509..42fcc9458432 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -127,7 +127,7 @@ static struct pci_driver nforce2_driver;
 
 /* For multiplexing support, we need a global reference to the 1st
    SMBus channel */
-#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE
+#if IS_ENABLED(CONFIG_I2C_NFORCE2_S4985)
 struct i2c_adapter *nforce2_smbus;
 EXPORT_SYMBOL_GPL(nforce2_smbus);
 
-- 
2.5.5

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module Javier Martinez Canillas <javier@osg.samsung.com> - 2016-04-26 19:30 +0200
  Re: [PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for  built-in or module Wolfram Sang <wsa@the-dreams.de> - 2016-04-26 23:40 +0200

csiph-web