Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1387220
| From | Lee Jones <lee.jones@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 2/8] mfd: stmpe: Add reset support for all STMPE variant |
| Date | 2016-04-26 10:20 +0200 |
| Message-ID | <rs6nV-45z-25@gated-at.bofh.it> (permalink) |
| References | <rpCNk-6J2-3@gated-at.bofh.it> <rpCX1-6Oi-29@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Tue, 19 Apr 2016, patrice.chotard@st.com wrote:
> From: Patrice Chotard <patrice.chotard@st.com>
>
> Reset was only implemented for STMPE1801 variant despite
> all variant have a SOFT_RESET bit.
>
> For STMPE2401/2403/801/1601/1801 SOFT_RESET bit is bit 7
> of SYS_CTRL register.
> For STMPE610/811 (which have the same variant id) SOFT_RESET
> bit is bit 1 of SYS_CTRL register.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
> ---
> drivers/mfd/stmpe.c | 23 +++++++++++++++--------
> drivers/mfd/stmpe.h | 7 +++++--
> 2 files changed, 20 insertions(+), 10 deletions(-)
When you fix and resubmit, please add my:
Acked-by: Lee Jones <lee.jones@linaro.org>
... for my own personal reference.
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index c553b73..af682d0 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -735,13 +735,22 @@ static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
> enable ? mask : 0);
> }
>
> -static int stmpe1801_reset(struct stmpe *stmpe)
> +static int stmpe_reset(struct stmpe *stmpe)
> {
> + u16 id_val = stmpe->variant->id_val;
> unsigned long timeout;
> int ret = 0;
> + u8 reset_bit;
> +
> + if (id_val == STMPE811_ID)
> + /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
> + reset_bit = STMPE811_SYS_CTRL_RESET;
> + else
> + /* all other STMPE variant use bit 7 of SYS_CTRL register */
> + reset_bit = STMPE_SYS_CTRL_RESET;
>
> ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
> - STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
> + reset_bit, reset_bit);
> if (ret < 0)
> return ret;
>
> @@ -750,7 +759,7 @@ static int stmpe1801_reset(struct stmpe *stmpe)
> ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
> if (ret < 0)
> return ret;
> - if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
> + if (!(ret & reset_bit))
> return 0;
> usleep_range(100, 200);
> }
> @@ -1074,11 +1083,9 @@ static int stmpe_chip_init(struct stmpe *stmpe)
> if (ret)
> return ret;
>
> - if (id == STMPE1801_ID) {
> - ret = stmpe1801_reset(stmpe);
> - if (ret < 0)
> - return ret;
> - }
> + ret = stmpe_reset(stmpe);
> + if (ret < 0)
> + return ret;
>
> if (stmpe->irq >= 0) {
> if (id == STMPE801_ID)
> diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
> index 406f9f2..4ae343d 100644
> --- a/drivers/mfd/stmpe.h
> +++ b/drivers/mfd/stmpe.h
> @@ -104,6 +104,8 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE_ICR_LSB_EDGE (1 << 1)
> #define STMPE_ICR_LSB_GIM (1 << 0)
>
> +#define STMPE_SYS_CTRL_RESET (1 << 7)
> +
> /*
> * STMPE801
> */
> @@ -126,6 +128,7 @@ int stmpe_remove(struct stmpe *stmpe);
> /*
> * STMPE811
> */
> +#define STMPE811_ID 0x0811
>
> #define STMPE811_IRQ_TOUCH_DET 0
> #define STMPE811_IRQ_FIFO_TH 1
> @@ -155,6 +158,8 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE811_REG_GPIO_FE 0x16
> #define STMPE811_REG_GPIO_AF 0x17
>
> +#define STMPE811_SYS_CTRL_RESET (1 << 1)
> +
> #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
> #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
> #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
> @@ -244,8 +249,6 @@ int stmpe_remove(struct stmpe *stmpe);
> #define STMPE1801_REG_GPIO_PULL_UP_MID 0x23
> #define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24
>
> -#define STMPE1801_MSK_SYS_CTRL_RESET (1 << 7)
> -
> #define STMPE1801_MSK_INT_EN_KPC (1 << 1)
> #define STMPE1801_MSK_INT_EN_GPIO (1 << 3)
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/8] STMPE fixes/rework and add STMPE1600 support <patrice.chotard@st.com> - 2016-04-19 14:30 +0200
[PATCH 7/8] gpio: stmpe: Add STMPE1600 support <patrice.chotard@st.com> - 2016-04-19 14:30 +0200
Re: [PATCH 7/8] gpio: stmpe: Add STMPE1600 support Linus Walleij <linus.walleij@linaro.org> - 2016-04-20 17:00 +0200
Re: [PATCH 7/8] gpio: stmpe: Add STMPE1600 support Patrice Chotard <patrice.chotard@st.com> - 2016-04-22 09:20 +0200
[PATCH 3/8] gpio: stmpe: fix edge and rising/falling edge detection <patrice.chotard@st.com> - 2016-04-19 14:30 +0200
Re: [PATCH 3/8] gpio: stmpe: fix edge and rising/falling edge detection kbuild test robot <lkp@intel.com> - 2016-04-19 14:40 +0200
Re: [PATCH 3/8] gpio: stmpe: fix edge and rising/falling edge detection Linus Walleij <linus.walleij@linaro.org> - 2016-04-20 16:40 +0200
Re: [PATCH 3/8] gpio: stmpe: fix edge and rising/falling edge detection Patrice Chotard <patrice.chotard@st.com> - 2016-04-21 15:50 +0200
[PATCH 8/8] gpio: stmpe: configure GPIO as output by default <patrice.chotard@st.com> - 2016-04-19 14:30 +0200
Re: [PATCH 8/8] gpio: stmpe: configure GPIO as output by default Linus Walleij <linus.walleij@linaro.org> - 2016-04-20 17:00 +0200
[PATCH 2/8] mfd: stmpe: Add reset support for all STMPE variant <patrice.chotard@st.com> - 2016-04-19 14:30 +0200
Re: [PATCH 2/8] mfd: stmpe: Add reset support for all STMPE variant Linus Walleij <linus.walleij@linaro.org> - 2016-04-20 16:40 +0200
Re: [PATCH 2/8] mfd: stmpe: Add reset support for all STMPE variant Lee Jones <lee.jones@linaro.org> - 2016-04-26 10:20 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Thierry Reding <thierry.reding@gmail.com> - 2016-04-19 14:50 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-04-20 20:00 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Stephen Warren <swarren@wwwdotorg.org> - 2016-04-19 18:00 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Patrice Chotard <patrice.chotard@st.com> - 2016-04-20 09:50 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Stephen Warren <swarren@wwwdotorg.org> - 2016-04-20 18:10 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Marcel Ziswiler <marcel.ziswiler@toradex.com> - 2016-04-21 05:20 +0200
Re: [PATCH 0/8] STMPE fixes/rework and add STMPE1600 support Linus Walleij <linus.walleij@linaro.org> - 2016-04-20 16:30 +0200
csiph-web