Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1384021

Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource

Show all headers | View raw

Hi Christoph,

Have you had time to look at the audit? Is there anything else I can do 
make progress on this?

On 2016-04-13 15:29:16 +0200, Niklas Söderlund wrote:
> Hi Christoph,
> 
> On 2016-03-21 08:26:01 -0700, Christoph Hellwig wrote:
> > On Thu, Mar 17, 2016 at 01:33:51PM +0200, Laurent Pinchart wrote:
> > > The good news is that, given that no code uses this new API at the moment, 
> > > there isn't much to audit. The patch series implements the resource mapping 
> > > for arch/arm only, and makes use of it in the rcar-dmac driver only. Would you 
> > > like anything audited else than the arch/arm dma mapping implementation, the 
> > > rcar-dmac driver and the code that then deals with the dma addresses (I'm 
> > > thinking about the IOMMU subsystem and the ipmmu-vmsa driver in particular) ?
> > 
> > Yes, it would be good to do an audit of all the ARM dma_ops as well
> > as generic code like drivers/base/dma-*.c, lib/dma-debug.c and
> > include/linux/dma-*.h
> 
> I have now done an audit to the best of my abilities, thanks to Laurent 
> for pointing me in the right direction. And from what I can tell we are 
> good.
> 
> * drivers/dma/sh/rcar-dmac.c
>   Once the phys_addr_t is mapped to a dma_addr_t using 
>   dma_map_resource() it is only used to check that the transfere do not 
>   cross 4GB boundaries and then only directly written to HW registers.
> 
> * drivers/iommu/iommu.c
>   - iommu_map()
>     Check that it's align to min page size or return -EINVAL then calls
>     domain->ops->map()
> 
> * drivers/iommu/ipmmu-vmsa.c
>   - ipmmu_map()
>     No logic only calls domain->ops->map()
> 
> * drivers/iommu/io-pgtable-arm.c
>   - arm_lpae_map()
>     No logic only calls __arm_lpae_map()
>   - __arm_lpae_map()
>     No logic only calls arm_lpae_init_pte()
>   - arm_lpae_init_pte()
>     Used to get a pte:
>       pte |= pfn_to_iopte(paddr >> data->pg_shift, data);
> 
> * drivers/iommu/io-pgtable-arm-v7s.c
>   - arm_v7s_map()
>     No logic only calls __arm_v7s_map()
>   - __arm_v7s_map()
>     No logic only calls arm_v7s_init_pte()
>   - arm_v7s_init_pte
>     Used to get a pte:
>       pte |= paddr & ARM_V7S_LVL_MASK(lvl);
> 
> * ARM dma-mapping
>   - dma_unmap_*
>     Only valid unmap is dma_unmap_resource() all others are an invalid 
>     use case.
>   - dma_sync_single_*
>     Invalid use case, memmory that is mapped is device memmory
>   - dma_common_mmap() and dma_mmap_attrs()
>     Invalid use case
>   - dma_common_get_sgtable() and dma_get_sgtable_attrs()
>     Invalid use case, only for dma_alloc_* allocated memory,
>   - dma_mapping_error()
>     OK

-- 
Regards,
Niklas Söderlund

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource Niklas Söderlund   <niklas.soderlund@ragnatech.se> - 2016-04-21 11:50 +0200

csiph-web