Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1382108

Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode

Show all headers | View raw

On 4/18/2016 4:36 PM, Tony Lindgren wrote:
> * Grygorii Strashko <grygorii.strashko@ti.com> [160418 08:59]:
>> On 04/15/2016 09:54 PM, Tony Lindgren wrote:
>>> * santosh shilimkar <santosh.shilimkar@oracle.com> [160415 08:22]:
>>>> On 4/15/2016 2:26 AM, Grygorii Strashko wrote:
>>>>>
>>>>> Santosh, Tony, do you want me to perform any additional actions regarding this patch?
>>>>>
>>>> This patch should be run across family of SOCs to make
>>>> sure wakeup works on all of those if not done already
>>>
>>> Also, I'm not sure if we can just drop this code in question.
>>>
>>> After this patch, what function updates the GPIO wkup_en registers
>>> depending on enable_irq_wake()/disable_irq_wake()?
>>>
>>
>> The main purpose of this patch is to *not* modify GPIO wkup_en registers
>> depending of enable_irq_wake()/disable_irq_wake() :), instead all
>> non wake up IRQs should be masked during suspend.
>
> OK that makes sense.
>
>> The GPIO wkup_en registers should be always in sync with GPIO irq_en when
>> GPIO IP is in smart-idle wakeup mode. And this is done now from
>> omap_gpio_unmask_irq/omap_gpio_mask_irq(). See also [1].
>>
>> In general, it is more or less similar to GIC + wakeupgen:
>> - during normal work (including cpuidle) GIC irq_en and Wakeupgen wkup_en
>> should be in sync always
>> - during suspend - only IRQs, marked as wake up sources, should be left
>> unmasked.
>>
>> Also, I've found old thread [2] where Santosh proposed to use IRQCHIP_MASK_ON_SUSPEND.
>> And it was not possible, at that time, but now IRQCHIP_MASK_ON_SUSPEND can be used :),
>> because OMAP GPIO driver was switched to use generic irq handler instead of chained, so
>> now OMAP GPIO irqs are properly handled by IRQ PM core.
>> [chained irqs (and chained irq handles) are not disabled during suspend/resume and they are
>>   not maintained by IRQ PM core as result they can trigger way too early on resume when
>>   OMAP GPIO is not ready/powered.]
>
> OK. For my tests this patch does not change anything. I noticed however
> that we still have some additional bug somewhere where GPIO wake up
> events work fine for omap3 PM runtime, but are flakey for suspend.
>
>> I've tested it on: am57x-evm, am437x-idk-evm, omap4-panda
>
> OK thanks! Based on my tests and the above:
>
> Acked-by: Tony Lindgren <tony@atomide.com>
>
If all works then consider my ack as well :-)

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode Tony Lindgren <tony@atomide.com> - 2016-04-15 21:00 +0200
  Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode Grygorii Strashko <grygorii.strashko@ti.com> - 2016-04-18 18:00 +0200
    Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode Tony Lindgren <tony@atomide.com> - 2016-04-19 01:40 +0200
      Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode santosh shilimkar <santosh.shilimkar@oracle.com> - 2016-04-19 02:10 +0200

csiph-web