Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1378119

Re: [PATCH] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey

From Sudeep Holla <sudeep.holla@arm.com>
Newsgroups linux.kernel
Subject Re: [PATCH] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey
Date 2016-04-13 19:30 +0200
Message-ID <rnwM3-4Jb-27@gated-at.bofh.it> (permalink)
References <rnwCm-4E2-5@gated-at.bofh.it>
Organization ARM

Show all headers | View raw



On 13/04/16 18:16, John Stultz wrote:
> Since the pmic8xxx-pwrkey driver is already supported in the
> qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
> configure proper device shutdown when ps_hold goes low, it is
> better to use that driver then a generic gpio button.
>
> Thus this patch remove the gpio power key entry here, so we
> don't get double input events from having two drivers enabled.
>
> The one gotcha with the pmic8xxx-pwrkey is it has a fairly
> long debounce delay, which we shorten here to make the button
> behave as expected.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> Cc: Andy Gross <agross@codeaurora.org>
> Cc: Vinay Simha BN <simhavcs@gmail.com>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Stephen Boyd <stephen.boyd@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
>   arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 15 +++++++++------
>   1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
> index c535b3f..7ac1c65 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
> @@ -29,12 +29,6 @@
>
>   	gpio-keys {
>   		compatible = "gpio-keys";
> -		power {
> -			label = "Power";
> -			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
> -			linux,code = <KEY_POWER>;
> -			gpio-key,wakeup;

You are dropping wakeup with this change. Is that intentional ?

If not, while you are at this, replace it with "wakeup-source"
which is standard binding.

If yes, then it solves the problem :). I had a patch to replace it, but
was waiting to check if any new files in linux-next before posting. For
now, this is the only legacy entry.

-- 
Regards,
Sudeep

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH] device-tree: nexus7-flo: Remove power gpio key entry and use pmic8xxx-pwrkey John Stultz <john.stultz@linaro.org> - 2016-04-13 19:20 +0200
  Re: [PATCH] device-tree: nexus7-flo: Remove power gpio key entry and  use pmic8xxx-pwrkey Sudeep Holla <sudeep.holla@arm.com> - 2016-04-13 19:30 +0200
    Re: [PATCH] device-tree: nexus7-flo: Remove power gpio key entry and  use pmic8xxx-pwrkey John Stultz <john.stultz@linaro.org> - 2016-04-13 19:40 +0200

csiph-web