[PATCH 4.5 100/238] 8250: use callbacks to access UART_DLL/UART_DLM

From	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newsgroups	linux.kernel
Subject	[PATCH 4.5 100/238] 8250: use callbacks to access UART_DLL/UART_DLM
Date	2016-04-10 20:50 +0200
Message-ID	<rmsAP-Sh-43@gated-at.bofh.it> (permalink)
References	<rmsr7-Nr-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

4.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Frias <sf84@laposte.net>

commit 0b41ce991052022c030fd868e03877700220b090 upstream.

Some UART HW has a single register combining UART_DLL/UART_DLM
(this was probably forgotten in the change that introduced the
callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9)

Fixes: b32b19b8ffc0 ("[SERIAL] 8250: set divisor register correctly ...")

Signed-off-by: Sebastian Frias <sf84@laposte.net>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_port.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -731,22 +731,16 @@ static int size_fifo(struct uart_8250_po
  */
 static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
 {
-	unsigned char old_dll, old_dlm, old_lcr;
-	unsigned int id;
+	unsigned char old_lcr;
+	unsigned int id, old_dl;
 
 	old_lcr = serial_in(p, UART_LCR);
 	serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+	old_dl = serial_dl_read(p);
+	serial_dl_write(p, 0);
+	id = serial_dl_read(p);
+	serial_dl_write(p, old_dl);
 
-	old_dll = serial_in(p, UART_DLL);
-	old_dlm = serial_in(p, UART_DLM);
-
-	serial_out(p, UART_DLL, 0);
-	serial_out(p, UART_DLM, 0);
-
-	id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
-	serial_out(p, UART_DLL, old_dll);
-	serial_out(p, UART_DLM, old_dlm);
 	serial_out(p, UART_LCR, old_lcr);
 
 	return id;

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 4.5 100/238] 8250: use callbacks to access UART_DLL/UART_DLM Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-04-10 20:50 +0200

csiph-web