Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1375623

Re: [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core

From Chen Feng <puck.chen@hisilicon.com>
Newsgroups linux.kernel
Subject Re: [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core
Date 2016-04-11 10:50 +0200
Message-ID <rmFHI-2Ui-9@gated-at.bofh.it> (permalink)
References <r1YlY-7rJ-5@gated-at.bofh.it> <rmFeI-2HC-53@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi lee,

Mark already took the regulator set.

Please help take the mfd part.
mfd: hi655x: Add document for mfd hi665x PMIC
and
mfd: hi655x: Add MFD driver for hi655x

thanks a lot.

On 2016/4/11 16:14, Lee Jones wrote:
> On Sun, 14 Feb 2016, Chen Feng wrote:
> 
>> The patch sets add support for Hi6220 PMIC Hi655x MFD core and its
>> regulator driver.
>> Current testing and support board is Hikey which is one of 96boards.
>> It is an arm64 open source board. For more information about this board,
>> please access https://www.96boards.org.
>>
>> This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>> Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>> We can use memory-mapped I/O to communicate.
>>
>> +----------------+             +-------------+
>> |                |             |             |
>> |    Hi6220      |   SSI bus   |   Hi655x    |
>> |                |-------------|             |
>> |                |(REGMAP_MMIO)|             |
>> +----------------+             +-------------+
>>
>> V2: Code refactoring of regulator.
>>
>> V3: Drop mtcmos from this patch and use regmap-irq.
>>
>> V4: Move the vset-table to driver code and donot open code for it.
>>
>> V5: Use regulators_node and of_match, donot open code fot it.
>>
>> V7: Change the constraints into hikey.dts and fix code in PMIC.
>>
>> V8: Change format in document, and fix bit mask in regulator.
>>
>> Chen Feng (5):
>>   mfd: hi655x: Add document for mfd hi665x PMIC
>>   regulator: hi655x: Document for hi655x regulator
>>   mfd: hi655x: Add MFD driver for hi655x
>>   regulator: hi655x: enable regulator for hi655x PMIC
>>   arm64: dts: hisilicon: Add hi655x pmic dts node
> 
> So what's going on with this set?  Can the MFD patches go in via my
> tree on their own?  Or are there dependencies between them and the
> Regulator changes?  If the latter, then we need Mark's Ack to
> proceed.
> 
>>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |  27 +++
>>  .../regulator/hisilicon,hi655x-regulator.txt       |  29 +++
>>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |  87 ++++++++
>>  drivers/mfd/Kconfig                                |  10 +
>>  drivers/mfd/Makefile                               |   1 +
>>  drivers/mfd/hi655x-pmic.c                          | 162 +++++++++++++++
>>  drivers/regulator/Kconfig                          |   8 +
>>  drivers/regulator/Makefile                         |   1 +
>>  drivers/regulator/hi655x-regulator.c               | 227 +++++++++++++++++++++
>>  include/linux/mfd/hi655x-pmic.h                    |  55 +++++
>>  10 files changed, 607 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>  create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
>>  create mode 100644 drivers/mfd/hi655x-pmic.c
>>  create mode 100644 drivers/regulator/hi655x-regulator.c
>>  create mode 100644 include/linux/mfd/hi655x-pmic.h
>>
> 

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

Re: [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Lee Jones <lee.jones@linaro.org> - 2016-04-11 10:20 +0200
  Re: [PATCH v8 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng <puck.chen@hisilicon.com> - 2016-04-11 10:50 +0200

csiph-web