Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1370233

RE: [Intel-wired-lan] [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for fiber

Show all headers | View raw

I have a couple of comments (sorry for not getting to it a bit sooner).

> For fiber media, e1000_get_settings should return ETH_TP_MDI_INVALID for
> eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
> call would not fail with -EOPNOTSUPP.

Should this be specific to fiber? Because the code just checks media != copper. There is at least other media type (e1000_media_type_internal_serdes), which will be affected by this change as well. What is the proper behavior in this case?

> e1000_set_spd_dplx should not automatically turn autoneg back on for forced
> 1000 Mbps full duplex settings.

I seem to remember that this code is there because the copper-based NICs only support 1000Mbps in auto-negotiation mode, not forced (this is according to the IEEE spec, as far as I know). I believe this code is there to ensure that a user can force the speed to 1000 via the API, and still have the link resolve correctly via auto-negotiation. I am concerned that changing this code will break clients that rely on it. Maybe it is best to also limit it to fiber devices only?

Thanks,
Dima (Intel e1000e maintainer).

-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces@lists.osuosl.org] On Behalf Of Daniel Walker
Sent: Wednesday, 30 March, 2016 22:35
To: Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson, Shannon; Wyborny, Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak, John; Williams, Mitch A
Cc: netdev@vger.kernel.org; xe-kernel@external.cisco.com; danielwa@fifo99.com; linux-kernel@vger.kernel.org; Steve Shih; intel-wired-lan@lists.osuosl.org
Subject: Re: [Intel-wired-lan] [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for fiber


So Intel maintainers (Jeff, Jesse, Shannon, Carolyn, Don, Bruce, and John)

I'm assuming no comments means this patch is acceptable , and I will resubmit it without the RFC. Is that acceptable ?


On 03/25/2016 02:58 PM, Daniel Walker wrote:
> From: Steve Shih <sshih@cisco.com>
>
> This patch fixes the issues for disabling auto-negotiation and forcing
> speed and duplex settings for the fiber media.
>
> For fiber media, e1000_get_settings should return ETH_TP_MDI_INVALID for
> eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
> call would not fail with -EOPNOTSUPP.
>
> e1000_set_spd_dplx should not automatically turn autoneg back on for forced
> 1000 Mbps full duplex settings.
>
> Cc: danielwa@fifo99.com
> Cc: xe-kernel@external.cisco.com
> Signed-off-by: Steve Shih <sshih@cisco.com>
> ---
>   drivers/net/ethernet/intel/e1000e/ethtool.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
> index 6cab1f3..cd03dcd 100644
> --- a/drivers/net/ethernet/intel/e1000e/ethtool.c
> +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
> @@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
>   	else
>   		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
>   
> +	if (hw->phy.media_type != e1000_media_type_copper)
> +		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
> +
>   	return 0;
>   }
>   
> @@ -236,8 +239,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
>   		mac->forced_speed_duplex = ADVERTISE_100_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_FULL:
> -		mac->autoneg = 1;
> -		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
> +		mac->forced_speed_duplex = ADVERTISE_1000_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
>   	default:

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@lists.osuosl.org
http://lists.osuosl.org/mailman/listinfo/intel-wired-lan
---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for fiber Daniel Walker <danielwa@cisco.com> - 2016-03-25 23:10 +0100
  Re: [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool  autoneg off for fiber Daniel Walker <danielwa@cisco.com> - 2016-03-30 21:50 +0200
    RE: [Intel-wired-lan] [PATCH-RFC] drivers: net: ethernet: intel:  e1000e: fix ethtool autoneg off for fiber "Ruinskiy, Dima" <dima.ruinskiy@intel.com> - 2016-04-03 16:30 +0200
      Re: [Intel-wired-lan] [PATCH-RFC] drivers: net: ethernet: intel:  e1000e: fix ethtool autoneg off for fiber Daniel Walker <danielwa@cisco.com> - 2016-04-05 01:10 +0200
        RE: [Intel-wired-lan] [PATCH-RFC] drivers: net: ethernet: intel:  e1000e: fix ethtool autoneg off for fiber "Ruinskiy, Dima" <dima.ruinskiy@intel.com> - 2016-04-05 15:50 +0200

csiph-web