Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1368249
| From | Lothar Waßmann <LW@KARO-electronics.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCHv3 2/5] ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp |
| Date | 2016-03-31 14:40 +0200 |
| Message-ID | <riK3h-531-33@gated-at.bofh.it> (permalink) |
| References | <riK3g-531-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Move the pinctrl setting for the board LED from the hoggrp node
to a separate node referenced by the LED driver, so that the pin is
free to be used for different purpose when the LED driver is disabled.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index a3e37a7..d96dba2 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -88,6 +88,8 @@
user_led: user {
label = "Heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_user_led>;
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
@@ -328,7 +330,6 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
@@ -634,6 +635,12 @@
MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */
>;
};
+
+ pinctrl_user_led: user-ledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
+ >;
+ };
};
&kpp {
--
2.1.4
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCHv3 0/5] ARM: dts: update Ka-Ro i.MX6 module support Lothar Waßmann <LW@KARO-electronics.de> - 2016-03-31 14:40 +0200 [PATCHv3 2/5] ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp Lothar Waßmann <LW@KARO-electronics.de> - 2016-03-31 14:40 +0200 [PATCHv3 4/5] ARM: dts: imx6: add support for more Ka-Ro electronics modules Lothar Waßmann <LW@KARO-electronics.de> - 2016-03-31 14:40 +0200 [PATCHv3 1/5] ARM: dts: imx6-tx6: remove regulator bus Lothar Waßmann <LW@KARO-electronics.de> - 2016-03-31 14:40 +0200
csiph-web