[PATCH resend v2 9/9] ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0

From	Chen-Yu Tsai <wens@csie.org>
Newsgroups	linux.kernel
Subject	[PATCH resend v2 9/9] ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0
Date	2016-03-29 11:30 +0200
Message-ID	<rhY8i-3VB-33@gated-at.bofh.it> (permalink)
References	<rhY8h-3VB-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

These 3 regulators are provided in sunxi-common-regulators.dtsi.
3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices.
These dummy regulators provide a stand-in when bindings that require
one, but the real regulator is not supported yet.

Since these are no longer needed, we can disable them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 8d8af1189d87..84a12fef5768 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -255,6 +255,18 @@
 
 #include "axp809.dtsi"
 
+&reg_vcc3v0 {
+	status = "disabled";
+};
+
+&reg_vcc3v3 {
+	status = "disabled";
+};
+
+&reg_vcc5v0 {
+	status = "disabled";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.7.0

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH resend v2 9/9] ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 Chen-Yu Tsai <wens@csie.org> - 2016-03-29 11:30 +0200

csiph-web