Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1363868

Re: Nonterministic hang during bootconsole/console handover on ath79

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

>> autoconfig_16550a() is doing all kinds of weird checks to detect different
>> hardware by writing a lot of register values which are documented as
>> reserved in the AR7242 datasheet (there's a leaked version going around
>> that can be easily googled...), no idea if any of those are problematic.
>> Just setting UPF_FIXED_TYPE as suggested by Peter would avoid that code
>> altogether.
> 
> That's just a debugging patch and not appropriate for permanent use,
> the reason being that this uart is _not_ 16550 compatible (or even 1645
0
> compatible).
> 
> The three options for 8250 driver support for this part are:
> 1. Similar to the debugging patch, set UPF_FIXED_TYPE but set port type
>    to PORT_8250 instead. This will lose FIFO support so 115K won't be
>    possible and likely neither will 38400.
> 
> 2. Set UPF_FIXED_TYPE but define a new PORT_* value and add support for
>    this PORT_* value to uart_config array, uapi headers, and anywhere
>    the scratch register is used.
> 
> 3. As with 2. above but don't set UPF_FIXED_TYPE and add a probe function
>    that detects ports of this type to autoconfig(). I don't recommend this
>    method.
> 
> This requirement is independent of fixing prom_putchar_ar71xx().
> 

I can send patches for all of this, and I think that 2. would be the nicest
solution. I've noticed though that include/uapi/linux/serial_core.h is
experiencing a little "overflow": PORT_MAX_8250 has grown just below the
first non-8250 entry. Should I just add the new entry at the bottom (and
thus grow the uart_config array by ~85 unused entries)? What about
PORT_MAX_8250 (used at least in drivers/tty/serial/8250/8250_of.c)?

Regards,
Matthias

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Nonterministic hang during bootconsole/console handover on ath79 Matthias Schiffer <mschiffer@universe-factory.net> - 2016-03-22 00:20 +0100
  Re: Nonterministic hang during bootconsole/console handover on ath79 Peter Hurley <peter@hurleysoftware.com> - 2016-03-22 03:50 +0100
    Re: Nonterministic hang during bootconsole/console handover on ath79 Matthias Schiffer <mschiffer@universe-factory.net> - 2016-03-22 14:10 +0100
      Re: Nonterministic hang during bootconsole/console handover on ath79 Peter Hurley <peter@hurleysoftware.com> - 2016-03-22 16:40 +0100
        Re: Nonterministic hang during bootconsole/console handover on ath79 Matthias Schiffer <mschiffer@universe-factory.net> - 2016-03-23 18:50 +0100
          Re: Nonterministic hang during bootconsole/console handover on ath79 Peter Hurley <peter@hurleysoftware.com> - 2016-03-24 01:50 +0100
            Re: Nonterministic hang during bootconsole/console handover on ath79 Matthias Schiffer <mschiffer@universe-factory.net> - 2016-03-24 03:10 +0100
              Re: Nonterministic hang during bootconsole/console handover on ath79 Peter Hurley <peter@hurleysoftware.com> - 2016-03-24 04:20 +0100
                Re: Nonterministic hang during bootconsole/console handover on ath79 Gabor Juhos <juhosg@openwrt.org> - 2016-03-25 14:10 +0100
                Re: Nonterministic hang during bootconsole/console handover on ath79 Peter Hurley <peter@hurleysoftware.com> - 2016-03-25 16:30 +0100
  Re: Nonterministic hang during bootconsole/console handover on  ath79 Antony Pavlov <antonynpavlov@gmail.com> - 2016-03-22 06:50 +0100
    Re: Nonterministic hang during bootconsole/console handover on ath79 Matthias Schiffer <mschiffer@universe-factory.net> - 2016-03-22 11:00 +0100

csiph-web