[PATCH 2/2] mISDN: Support DR6 indication in mISDNipac driver

Path	csiph.com!news.freedyn.net!aioe.org!gothmog.csi.it!bofh.it!news.nic.it!robomod
From	"Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Newsgroups	linux.kernel
Subject	[PATCH 2/2] mISDN: Support DR6 indication in mISDNipac driver
Date	Sun, 13 Mar 2016 00:20:01 +0100
Message-ID	<rc0Zb-56K-7@gated-at.bofh.it> (permalink)
User-Agent	Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0
MIME-Version	1.0
Content-Type	text/plain; charset=UTF-8
Content-Transfer-Encoding	7bit
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	44
Organization	linux.* mail to news gateway
X-Original-Cc	netdev@vger.kernel.org, linux-kernel <linux-kernel@vger.kernel.org>
X-Original-Date	Sun, 13 Mar 2016 00:19:07 +0100
X-Original-Message-ID	<56E4A3EB.4050507@maciej.szmigiero.name>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1356547

Show key headers only | View raw

According to figure 39 in PEB3086 data sheet, version 1.4 this indication
replaces DR when layer 1 transition source state is F6.

This fixes mISDN layer 1 getting stuck in F6 state in TE mode on
Dialogic Diva 2.02 card (and possibly others) when NT deactivates it.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
---
 drivers/isdn/hardware/mISDN/ipac.h      | 1 +
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/isdn/hardware/mISDN/ipac.h b/drivers/isdn/hardware/mISDN/ipac.h
index 76aa6f8f298e..720ee72aab6a 100644
--- a/drivers/isdn/hardware/mISDN/ipac.h
+++ b/drivers/isdn/hardware/mISDN/ipac.h
@@ -217,6 +217,7 @@ struct ipac_hw {
 #define ISAC_IND_SD		0x2
 #define ISAC_IND_DIS		0x3
 #define ISAC_IND_RSY		0x4
+#define ISAC_IND_DR6		0x5
 #define ISAC_IND_EI		0x6
 #define ISAC_IND_PU		0x7
 #define ISAC_IND_ARD		0x8
diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index cb428b9ee441..aa9b6c3cadc1 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -80,6 +80,7 @@ isac_ph_state_bh(struct dchannel *dch)
 		l1_event(dch->l1, HW_DEACT_CNF);
 		break;
 	case ISAC_IND_DR:
+	case ISAC_IND_DR6:
 		dch->state = 3;
 		l1_event(dch->l1, HW_DEACT_IND);
 		break;
@@ -660,6 +661,7 @@ isac_l1cmd(struct dchannel *dch, u32 cmd)
 		spin_lock_irqsave(isac->hwlock, flags);
 		if ((isac->state == ISAC_IND_EI) ||
 		    (isac->state == ISAC_IND_DR) ||
+		    (isac->state == ISAC_IND_DR6) ||
 		    (isac->state == ISAC_IND_RS))
 			ph_command(isac, ISAC_CMD_TIM);
 		else

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 2/2] mISDN: Support DR6 indication in mISDNipac driver "Maciej S. Szmigiero" <mail@maciej.szmigiero.name> - 2016-03-13 00:20 +0100
  Re: [PATCH 2/2] mISDN: Support DR6 indication in mISDNipac driver isdn@linux-pingi.de - 2016-03-13 04:20 +0100
  Re: [PATCH 2/2] mISDN: Support DR6 indication in mISDNipac driver David Miller <davem@davemloft.net> - 2016-03-14 21:00 +0100

csiph-web