Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1352010

Re: DMAR error messages after 'shutdown -r'.

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

(Sorry for the delay, $DAYJOB took a lot of cycles.  Adding AHCI maintainers to cc:)

On Tue, 16 Feb 2016 17:47:45 +0100, Joerg Roedel said:
> On Tue, Feb 09, 2016 at 02:59:00PM -0500, Valdis Kletnieks wrote:
> > [    0.027629] Freeing SMP alternatives memory: 28K (ffffffff8e111000 - ffffffff8e118000)
> > [    0.048199] ftrace: allocating 31090 entries in 122 pages
> > [    0.061837] DMAR: Host address width 36
> > [    0.061841] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
> > [    0.061894] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
> > [    0.061896] DMAR: RMRR base: 0x000000cdb11000 end: 0x000000cdb30fff
> > [    0.061899] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
> > [    0.061901] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
> > [    0.061903] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> > ---- Error here....
> > [    0.062027] DMAR: DRHD: handling fault status reg 2
> > [    0.062034] DMAR: DMAR:[DMA Read] Request device [00:1f.2] fault addr cdacd000
> >                DMAR:[fault reason 06] PTE Read access is not set
> > ----
>
> This is probably from a missing RMRR entry for device 00:1f.2. Can you
> please post full dmesg after boot?

lspci says:
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)

Not sure why I only see it on reboots - that means that when powering up, the kernel
gets handed a device config it likes, but when rebooting, something is leaving the
device in a config the kernel doesn't want to see.

Cold and warm boot dmesg's attached.

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: DMAR error messages after 'shutdown -r'. Valdis.Kletnieks@vt.edu - 2016-03-07 22:50 +0100
  Re: DMAR error messages after 'shutdown -r'. Joerg Roedel <joro@8bytes.org> - 2016-03-16 18:50 +0100

csiph-web