Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1354284

Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver

Show all headers | View raw

On Wed, Mar 9, 2016 at 1:58 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Tue, Mar 08, 2016 at 02:46:52PM -0800, Andrey Smirnov wrote:
>> >>
>> >> I don't think I understand what you mean, could you give me an example
>> >> of how I'd use local-mac-address property for that use case? AFAIK,
>> >> local-mac-address is just an array of bytes embedded into device tree,
>> >
>> > Well, yeah, but the nvmem-blob is also just an array of bytes embedded
>> > into the DT, right?
>>
>> One is accessible via "nvmem" API and the other one isn't.
>
> But there's no point in accessing it with nvmem in the first
> place. You want to provide some information to the ethernet driver to
> give it his mac address, that's what you want to do.

No, that's not what I want to do. I want to be able to deal with data
layout and composition of a "nvmem" cell at the data producer site and
not add custom hacks to the consumer code.

> And we already have a property that does just that, and is supported by all the
> ethernet drivers. Why would you want to add a special case to
> something that is doing exactly the same thing?

That's not what I am trying to add. The intent of "nvmem-blob" is to
be use as a part of a "nvmem-composite" cell in order to be able to
inject constants. It has nothing to do with storing complete
MAC-addresses, the fact that it can be used as a complete replacement
of "local-mac-address" is just a side-effect.

Sidenote: now that we are on the subject of using this code as
equivalent of "local-mac-address", I'd argue that if it were possible
to ignore backwards compatibility, removing "local-mac-address" from
all the drivers and .dts's and replacing it with something to the
effect of "nvmem-blob" would be a better solution since you'd be able
to handle the cases of MAC address being a part of DT and being stored
in NVM using exactly the same code-path.

>
>> >> how would it get populated with data from OTP memory of SoC?
>> >
>> > In the bootloader, or Linux, read the OTP, patch the DT to add that
>> > node, done.
>>
>> No, it's not really "done", because if you read my previous messages,
>> "read the OTP, patch the DT" is exactly the problem I am trying to
>> solve. The overall goal is to be able to read a certain "nvmem" cell
>> and patch DT with that data as MAC address,
>
> But *why* do you need to store that using nvmem in the first place?

Because I want to combine that data with other nvmem blobs using
"nvmem-composite"

> You really have two solutions here: make your ethernet driver read the
> EEPROM using nvmem directly or do it in the bootloader and set
> local-mac-address (note that you can do both).

Which would lead to per-board/per-SoC custom code. I've had that kind
of solution before I started this discussion. I am hoping that we all
can come up with more elegant solution and that's why I started this
thread.

>
>> however in it's current incarnation "nvmem" doesn't have provisions
>> to make cells that are just combination of other cells (patch #3)
>
> This use case is valid.
>
>> and to embed certain data in DT and then access it as "nvmem" cell
>> (patch #2)
>
> And this one is redundant.

How is it redundant? What kernel code allows one to create a constant
"nvmem" cell?

And why do you think #3 valid? Your solution for #2, namely:

> make your ethernet driver read the
> EEPROM using nvmem directly or do it in the bootloader and set
> local-mac-address (note that you can do both)

applies in the case of #3 as well. I can read and shuffle the data in
either consumer side (in this particular case the Ethernet driver) or
in the bootloader.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-03-07 09:20 +0100
  Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Andrey Smirnov <andrew.smirnov@gmail.com> - 2016-03-08 05:10 +0100
    Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-03-08 23:30 +0100
      Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Andrey Smirnov <andrew.smirnov@gmail.com> - 2016-03-08 23:50 +0100
        Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Trent Piepho <tpiepho@kymetacorp.com> - 2016-03-09 00:40 +0100
          Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-03-09 11:20 +0100
            Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Trent Piepho <tpiepho@kymetacorp.com> - 2016-03-09 21:00 +0100
        Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-03-09 11:00 +0100
          Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Andrey Smirnov <andrew.smirnov@gmail.com> - 2016-03-09 18:10 +0100
      Re: [RESEND RFC 2/3] nvmem: Add 'nvmem-blob' driver Sascha Hauer <s.hauer@pengutronix.de> - 2016-03-09 09:10 +0100

csiph-web