Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1449436

RE: [RFC] regulator: da9052/53: da9052-i2c.txt binding document changes

From Steve Twiss <stwiss.opensource@diasemi.com>
Newsgroups linux.kernel
Subject RE: [RFC] regulator: da9052/53: da9052-i2c.txt binding document changes
Date 2016-07-25 13:40 +0200
Message-ID <rYMoN-40H-3@gated-at.bofh.it> (permalink)
References <rXG26-4Bq-5@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On 22 July 2016 11:36, Steve Twiss wrote:

> The binding file for DA9052/53 exists in the kernel and was originally
> submitted by Ying-Chun Liu from Linaro way back in 2012.
[...]
> > git show 58d114b
 [...]
> regulator names are added to the binding document but not used in the driver,
> also they are named incorrectly compared to the datasheets and Linux driver,
> and are misleading and confusing.
> 
> +Sub-nodes:
> +- regulators : Contain the regulator nodes. The DA9052/53 regulators are
> +  bound using their names as listed below:
> +
> +    buck0     : regulator BUCK0
> +    buck1     : regulator BUCK1
> +    buck2     : regulator BUCK2
> +    buck3     : regulator BUCK3
> +    ldo4      : regulator LDO4
> +    ldo5      : regulator LDO5
> +    ldo6      : regulator LDO6
> +    ldo7      : regulator LDO7
> +    ldo8      : regulator LDO8
> +    ldo9      : regulator LDO9
> +    ldo10     : regulator LDO10
> +    ldo11     : regulator LDO11
> +    ldo12     : regulator LDO12
> +    ldo13     : regulator LDO13

Never mind, I guess this is solved now.

There are already several device tree files using a naming scheme different to that found
in the binding text document. Since those have been used for real already, I will just follow
those existing DT file naming conventions instead.

./arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
./arch/arm/boot/dts/imx53-qsb.dts

Those board files files use the naming convention:
{ buck1, buck2, buck3, buck4 }
{ ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10 }

So, instead of the naming convention used in the existing binding text file (listed above)
I will send a patch to update that file to use with the existing usage already found in the
kernel board files.

Regards,
Steve

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[RFC] regulator: da9052/53: da9052-i2c.txt binding document changes Steve Twiss <stwiss.opensource@diasemi.com> - 2016-07-22 12:40 +0200
  RE: [RFC] regulator: da9052/53: da9052-i2c.txt binding document  changes Steve Twiss <stwiss.opensource@diasemi.com> - 2016-07-25 13:40 +0200

csiph-web