Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1449334

Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early

Show all headers | View raw

On Fri, 22 Jul 2016, Bjorn Helgaas wrote:
> On Wed, Jul 13, 2016 at 05:18:33PM +0100, Marc Zyngier wrote:
> > and it turns out that end-points are allowed to latch the content
> > of the MSI configuration registers as soon as MSIs are enabled.
> > In Bharat's case, the end-point ends up using whatever was there
> > already, which is not what you want.
> > 
> > In order to make things converge, we introduce a new MSI domain
> > flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for
> > PCI/MSI. When set, this flag forces the programming of the end-point
> > as soon as the MSIs are allocated.
> > 
> > A consequence of this is that we have an extra activate in
> > irq_startup, but that should be without much consequence.
> > 
> > Reported-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > Tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> Thomas, let me know if you'd like me to take this.  It looks like the
> real smarts here are in kernel/irq, so I assume you'll take it unless
> I hear otherwise.

I'll take it. Though I have second thoughts about the whole issue.

We deliberately made the allocation sequence of interrupts in a way that we
can easily rollback in case of failure.

We achieved that by activating the interrupts only at request time and not
somewhere in the middle of the allocation sequence. That makes the whole
hierarchical allocation more robust and avoids complex rollbacks.

Now that new flag is basically torpedoing that approach.

What I really wonder is why that is only an issue with that particular xilinx
hardware/IP block. I'm aware that up to PCI 2.3 the mask bit for MSI
interrupts is optional or in really old versions not even specified. So only
if that mask bit is missing the above described issue can happen.

If not, then we might have a general issue that we don't mask the entry before
we call pci_msi_set_enable().

Thoughts?

	tglx

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] genirq/msi: Make sure PCI MSIs are activated early Marc Zyngier <marc.zyngier@arm.com> - 2016-07-13 18:30 +0200
  Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early Bjorn Helgaas <helgaas@kernel.org> - 2016-07-23 00:10 +0200
    Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early Thomas Gleixner <tglx@linutronix.de> - 2016-07-25 09:50 +0200
      Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early Bjorn Helgaas <helgaas@kernel.org> - 2016-07-25 16:50 +0200

csiph-web