Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1446298
| From | Jamie Lentin <jm@lentin.co.uk> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T |
| Date | 2016-07-19 11:50 +0200 |
| Message-ID | <rWzP3-2ko-15@gated-at.bofh.it> (permalink) |
| References | <rVzo5-5n4-3@gated-at.bofh.it> <rVzo6-5n4-33@gated-at.bofh.it> <rW1kl-5q0-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Sun, 17 Jul 2016, Rob Herring wrote:
> On Sat, Jul 16, 2016 at 03:29:04PM +0100, Jamie Lentin wrote:
>> This is a router based on the mv88f5181 chipset.
>>
>> http://www.netgear.com/support/product/WNR854T.aspx
>> http://wiki.openwrt.org/toh/netgear/wnr854t
>>
>> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
>> ---
>> .../bindings/arm/marvell/marvell,orion5x.txt | 1 +
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/orion5x-netgear-wnr854t.dts | 200 +++++++++++++++++++++
>> arch/arm/mach-orion5x/Kconfig | 6 +
>> arch/arm/mach-orion5x/Makefile | 1 +
>> arch/arm/mach-orion5x/board-wnr854t.c | 78 ++++++++
>> 6 files changed, 287 insertions(+)
>> create mode 100644 arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
>> create mode 100644 arch/arm/mach-orion5x/board-wnr854t.c
>>
>> diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
>> index ff3c120..748a8f2 100644
>> --- a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
>> +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
>> @@ -22,3 +22,4 @@ board. Currently known boards are:
>> "lacie,d2-network"
>> "marvell,rd-88f5182-nas"
>> "maxtor,shared-storage-2"
>> +"netgear,wnr854t"
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 95c1923..63b9202 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -535,6 +535,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
>> orion5x-linkstation-lswtgl.dtb \
>> orion5x-lswsgl.dtb \
>> orion5x-maxtor-shared-storage-2.dtb \
>> + orion5x-netgear-wnr854t.dtb \
>> orion5x-rd88f5182-nas.dtb
>> dtb-$(CONFIG_ARCH_PRIMA2) += \
>> prima2-evb.dtb
>> diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
>> new file mode 100644
>> index 0000000..a8e89d8
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
>> @@ -0,0 +1,200 @@
>> +/*
>> + * Copyright (C) 2014 Jamie Lentin <jm@lentin.co.uk>
>
> It's 2016 now.
>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include "orion5x-mv88f5181.dtsi"
>> +
>> +/ {
>> + model = "Netgear WNR854-t";
>> + compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
>> + "marvell,orion5x";
>> +
>> + memory {
>> + reg = <0x00000000 0x2000000>; /* 32 MB */
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200n8 earlyprintk";
>> + linux,stdout-path = &uart0;
>
> As kind of mentioned, drop the linux prefix here.
>
>> + };
>> +
>> + soc {
>> + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
>> + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
>> + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
>> + };
>> +
>> + gpio-keys {
>> + compatible = "gpio-keys";
>> + pinctrl-0 = <&pmx_reset_switch>;
>> + pinctrl-names = "default";
>> +
>> + reset {
>> + label = "Reset Button";
>> + linux,code = <KEY_RESTART>;
>> + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> + pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
>> + pinctrl-names = "default";
>> +
>> + led@0 {
>> + label = "power:green";
>> + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
>> + };
>> +
>> + led@1 {
>> + label = "power:blink";
>> + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
>> + };
>> +
>> + led@2 {
>> + label = "wan:green";
>> + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> +
>> + dsa@0 {
>> + compatible = "marvell,dsa";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + dsa,ethernet = <ðport>;
>> + dsa,mii-bus = <&mdio>;
>> +
>> + switch@0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0 0>; /* MDIO address 0, switch 0 in tree */
>> +
>> + port@0 {
>> + reg = <0>;
>> + label = "lan3";
>> + };
>> +
>> + port@1 {
>> + reg = <1>;
>> + label = "lan4";
>> + };
>> +
>> + port@2 {
>> + reg = <2>;
>> + label = "wan";
>> + };
>> +
>> + port@3 {
>> + reg = <3>;
>> + label = "cpu";
>> + };
>> +
>> + port@5 {
>> + reg = <5>;
>> + label = "lan1";
>> + };
>> +
>> + port@7 {
>> + reg = <7>;
>> + label = "lan2";
>> + };
>> + };
>> + };
>> +};
>> +
>> +&devbus_bootcs {
>> + status = "okay";
>> +
>> + devbus,keep-config;
>> +
>> + flash@0 {
>> + compatible = "cfi-flash";
>> + reg = <0 0x800000>;
>> + bank-width = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + partition@0 {
>
> The new recommended style adds a level here with a partitions node and
> the type of partitioning.
>
>> + label = "kernel";
>> + reg = <0x0 0x100000>;
>> + };
>> +
>> + partition@100000 {
>> + label = "rootfs";
>> + reg = <0x100000 0x660000>;
>> + };
>> +
>> + partition@760000 {
>> + label = "uboot_env";
>> + reg = <0x760000 0x20000>;
>> + };
>> +
>> + partition@780000 {
>> + label = "uboot";
>> + reg = <0x780000 0x80000>;
>> + read-only;
>> + };
>> + };
>> +};
>> +
>> +&mdio {
>> + status = "okay";
>> +};
>> +
>> +ð {
>> + status = "okay";
>> + ethernet-port@0 {
>> + speed = <1000>;
>> + duplex = <1>;
>> + };
>> +};
>> +
>> +&pinctrl {
>> + pinctrl-0 = <&pmx_pci_gpios &pmx_ge>;
>> + pinctrl-names = "default";
>> +
>> + pmx_power_led: pmx-power-led {
>> + marvell,pins = "mpp0";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_reset_switch: pmx-reset-switch {
>> + marvell,pins = "mpp1";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_power_led_blink: pmx-power-led-blink {
>> + marvell,pins = "mpp2";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_wan_led: pmx-wan-led {
>> + marvell,pins = "mpp3";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_pci_gpios: pmx-pci-gpios {
>> + marvell,pins = "mpp4";
>> + marvell,function = "gpio";
>> + };
>> +
>> + pmx_ge: pmx-ge {
>> + marvell,pins = "mpp9", "mpp12", "mpp13", "mpp14", "mpp15",
>> + "mpp16", "mpp17", "mpp18", "mpp19";
>> + marvell,function = "ge";
>> + };
>> +};
>> +
>> +&uart0 {
>> + /* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
>> index a2af158..1fdb95d 100644
>> --- a/arch/arm/mach-orion5x/Kconfig
>> +++ b/arch/arm/mach-orion5x/Kconfig
>> @@ -151,6 +151,12 @@ config MACH_MSS2_DT
>> Say 'Y' here if you want your kernel to support the
>> Maxtor Shared Storage II platform.
>>
>> +config MACH_WNR854T_DT
>
> There should only be at most 1 kconfig entry for all orion5x DT based
> platforms.
Even though it needs arch/arm/mach-orion5x/board-wnr854t.c to init the
PCI? orion5x currently has other board _DT options, I presumed for this
reason.
>> + bool "Netgear WNR854T (Flattened Device Tree)"
>> + help
>> + Say 'Y' here if you want your kernel to support the
>> + Netgear WNR854T platform.
>> +
>> config MACH_WNR854T
>> bool "Netgear WNR854T"
>> help
>
--
Jamie Lentin
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v0 00/10] Convert Netgear WNR854T to devicetree Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
[PATCH v0 09/10] net: phy: Re-attempt custom DT configuration after configuration Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 09/10] net: phy: Re-attempt custom DT configuration after configuration Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:50 +0200
[PATCH v0 03/10] arm: orion5x: Add clk support for mv88f5181 Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 03/10] arm: orion5x: Add clk support for mv88f5181 Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:20 +0200
Re: [PATCH v0 03/10] arm: orion5x: Add clk support for mv88f5181 Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-07-16 19:40 +0200
Re: [PATCH v0 03/10] arm: orion5x: Add clk support for mv88f5181 Rob Herring <robh@kernel.org> - 2016-07-17 22:40 +0200
[PATCH v0 01/10] arm: orion5x: Add required properties for orion-wdt to DT node Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 01/10] arm: orion5x: Add required properties for orion-wdt to DT node Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:10 +0200
[PATCH v0 10/10] arm: orion5x: Configure Netgear WNR854T network port LEDs Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
[PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:40 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:40 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Arnd Bergmann <arnd@arndb.de> - 2016-07-16 21:20 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Jamie Lentin <jm@lentin.co.uk> - 2016-07-17 12:10 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Arnd Bergmann <arnd@arndb.de> - 2016-07-17 22:50 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - 2016-07-18 11:50 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Arnd Bergmann <arnd@arndb.de> - 2016-07-18 12:10 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Arnd Bergmann <arnd@arndb.de> - 2016-07-19 11:50 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Jamie Lentin <jm@lentin.co.uk> - 2016-07-19 12:10 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Rob Herring <robh@kernel.org> - 2016-07-17 23:00 +0200
Re: [PATCH v0 06/10] arm: orion5x: Add DT-based support for Netgear WNR854T Jamie Lentin <jm@lentin.co.uk> - 2016-07-19 11:50 +0200
[PATCH v0 07/10] arm: orion5x: Remove old non-DT-based WNR854T support Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 07/10] arm: orion5x: Remove old non-DT-based WNR854T support Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:40 +0200
[PATCH v0 04/10] arm: orion5x: Generalise mv88f5181l pinctrl support for 88f5181 Jamie Lentin <jm@lentin.co.uk> - 2016-07-16 17:10 +0200
Re: [PATCH v0 04/10] arm: orion5x: Generalise mv88f5181l pinctrl support for 88f5181 Andrew Lunn <andrew@lunn.ch> - 2016-07-16 18:20 +0200
Re: [PATCH v0 04/10] arm: orion5x: Generalise mv88f5181l pinctrl support for 88f5181 Rob Herring <robh@kernel.org> - 2016-07-17 22:50 +0200
csiph-web