Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1447031

Re: [PATCHv8] wlcore: spi: add wl18xx support

Show all headers | View raw

"Reizer, Eyal" <eyalr@ti.com> writes:

> Add support for using with both wl12xx and wl18xx.
>
> - all wilink family needs special init command for entering wspi mode.
>   extra clock cycles should be sent after the spi init command while the
>   cs pin is high.
> - Use inverted chip select for sending a dummy 4 bytes command that
>   completes the init stage.
>
> Signed-off-by: Eyal Reizer <eyalr@ti.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> v1->v2:update device tree bindings configuration
> v2->v3:revert from manual gpio manipulation. use inverted chip select instead
> for sending the extra init cycle which, achieves the same hardware purpose.
> update device tree bindings docucmentation accordingly
> v3->v4: Remove redundant data form binding documentation and fix chip select
> number mismatch in wl1271 example
> v4->v5: Rebase on top of head of wireless-drivers-next
> v5->v6: Add ACKs
> v6->v7: Mail format issues
> v7->v8: Remove redundant varaible from wlcore_probe_of

I have already applied this patch, it's too late to send a new version.
Now you need to send a new patch, on top of wireless-drivers-next, which
removes the redundant variable.

-- 
Kalle Valo

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCHv8] wlcore: spi: add wl18xx support "Reizer, Eyal" <eyalr@ti.com> - 2016-07-20 09:00 +0200
  RE: [PATCHv8] wlcore: spi: add wl18xx support "Reizer, Eyal" <eyalr@ti.com> - 2016-07-20 09:10 +0200
  Re: [PATCHv8] wlcore: spi: add wl18xx support Kalle Valo <kvalo@codeaurora.org> - 2016-07-20 09:10 +0200

csiph-web