Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1444831

Re: [PATCH v5] wlcore: spi: add wl18xx support

Show all headers | View raw

On Sun, Jul 10, 2016 at 08:32:40AM +0000, Reizer, Eyal wrote:
> Add support for using with both wl12xx and wl18xx.
> 
> - all wilink family needs special init command for entering wspi mode.
>   extra clock cycles should be sent after the spi init command while the
>   cs pin is high.
> - Use inverted chip select for sending a dummy 4 bytes command that
>   completes the init stage.
> 
> Signed-off-by: Eyal Reizer <eyalr@ti.com>
> ---
> v1->v2:update device tree bindings configuration
> v2->v3:revert from manual gpio manipulation. use inverted chip select instead
> for sending the extra init cycle which, achieves the same hardware purpose.
> update device tree bindings docucmentation accordingly
> v3->v4: Remove redundant data form binding documentation and fix chip select
> number mismatch in wl1271 example
> v4->v5: Rebase on top of head of wireless-drivers-next

Please add acks when reposting.

Rob

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v5] wlcore: spi: add wl18xx support "Reizer, Eyal" <eyalr@ti.com> - 2016-07-10 10:40 +0200
  Re: [PATCH v5] wlcore: spi: add wl18xx support Rob Herring <robh@kernel.org> - 2016-07-16 15:50 +0200
  [PATCH v5] wlcore: spi: add wl18xx support "Reizer, Eyal" <eyalr@ti.com> - 2016-07-17 08:40 +0200
    Re: [PATCH v5] wlcore: spi: add wl18xx support Kalle Valo <kvalo@codeaurora.org> - 2016-07-18 19:10 +0200

csiph-web