Re: [PATCH 1/1] ARM: dts: sunxi: Add a olinuxino-lime2-emmc

From	Olliver Schinagl <oliver@schinagl.nl>
Newsgroups	linux.kernel
Subject	Re: [PATCH 1/1] ARM: dts: sunxi: Add a olinuxino-lime2-emmc
Date	2016-07-15 11:10 +0200
Message-ID	<rV7i9-52g-19@gated-at.bofh.it> (permalink)
References	(15 earlier) <rV7ia-52g-43@gated-at.bofh.it> <rV7ia-52g-45@gated-at.bofh.it> <rV7ia-52g-47@gated-at.bofh.it> <rV7ia-52g-49@gated-at.bofh.it> <rV7ia-52g-51@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 15-07-16 10:39, stefan.mavrodiev@gmail.com wrote:
> Hi Olliver,
>
> Why are you using nRST signal?
> What I mean is this pin is inactive on this eMMC chip. To use the signal
> byte 162 of ECSD registers should be written.
Then that sounds like a bug in the mmc layer I would say (or a missing 
attribute in the dts), we have a nRST signal it is wired, if the chip 
ignores it, then nothing lost, if the chip needs to be initialized with 
byte 162 of the ECSD register to make the nRST work, then that it sounds 
like it should be fixed there?

By ommitting the nRST signal just because the chip isn't properly 
initialized sounds more like a work-around to me, but I could be wrong 
and see things wrong.

What do the mmc guys, who have far more experience here, say?

>
> On my board, this "reset" signal causes eMMC not to work.
That supprises me, as afaik I was using it just fine...

Olliver
>
> Best regards,
> Stefan Mavrodiev

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 1/1] ARM: dts: sunxi: Add a olinuxino-lime2-emmc Olliver Schinagl <oliver@schinagl.nl> - 2016-07-15 11:10 +0200

csiph-web