Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1440917

Re: linux-next: manual merge of the pwm tree with the regulator tree

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Mon, Jul 11, 2016 at 09:47:34AM -0700, Doug Anderson wrote:
> Hi,
> 
> On Sun, Jul 10, 2016 at 11:56 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > Hi Thierry,
> >
> > Today's linux-next merge of the pwm tree got a conflict in:
> >
> >   drivers/regulator/pwm-regulator.c
> >
> > between commit:
> >
> >   830583004e61 ("regulator: pwm: Drop unneeded pwm_enable() call")
> >   27bfa8893b15 ("regulator: pwm: Support for enable GPIO")
> >   c2588393e631 ("regulator: pwm: Fix regulator ramp delay for continuous mode")
> >
> > from the regulator tree and commit:
> >
> >   b0303deaa480 ("regulator: pwm: Adjust PWM config at probe time")
> >   8bd57ca236d0 ("regulator: pwm: Switch to the atomic PWM API")
> >   25d16595935b ("regulator: pwm: Retrieve correct voltage")
> >   53f239af4c14 ("regulator: pwm: Support extra continuous mode cases")
> >
> > from the pwm tree.
> >
> > I fixed it up (I think, please check - see below) and can carry the fix
> > as necessary. This is now fixed as far as linux-next is concerned, but
> > any non trivial conflicts should be mentioned to your upstream maintainer
> > when your tree is submitted for merging.  You may also want to consider
> > cooperating with the maintainer of the conflicting tree to minimise any
> > particularly complex conflicts.
> >
> > --
> > Cheers,
> > Stephen Rothwell
> 
> [ cut ]
> 
> >  -      /* Delay required by PWM regulator to settle to the new voltage */
> >  -      usleep_range(ramp_delay, ramp_delay + 1000);
> >  +      /* Ramp delay is in uV/uS. Adjust to uS and delay */
> >  +      ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
> 
> This was what I was worried about and why I originally sent my patch
> based upon Boris's series.  The above should be:
> 
> ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
> 
> Specifically note the use of "req_min_uV" and not "min_uV".

Okay, so this is something that needs to be fixed up in one of Boris'
patches? Can you help point out where exactly? The conflict should be
gone as of tomorrow's linux-next.

Thierry

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

linux-next: manual merge of the pwm tree with the regulator tree Stephen Rothwell <sfr@canb.auug.org.au> - 2016-07-11 09:00 +0200
  Re: linux-next: manual merge of the pwm tree with the regulator tree Doug Anderson <dianders@chromium.org> - 2016-07-11 18:50 +0200
    Re: linux-next: manual merge of the pwm tree with the regulator tree Thierry Reding <thierry.reding@gmail.com> - 2016-07-11 23:40 +0200
      Re: linux-next: manual merge of the pwm tree with the regulator tree Thierry Reding <thierry.reding@gmail.com> - 2016-07-11 23:40 +0200
        Re: linux-next: manual merge of the pwm tree with the regulator tree Thierry Reding <thierry.reding@gmail.com> - 2016-07-25 10:30 +0200
          Re: linux-next: manual merge of the pwm tree with the regulator tree Doug Anderson <dianders@chromium.org> - 2016-07-25 15:30 +0200
            Re: linux-next: manual merge of the pwm tree with the regulator tree Thierry Reding <thierry.reding@gmail.com> - 2016-07-25 16:30 +0200

csiph-web